BMW M3 Forum (E90 E92) - View Single Post - Hardware For Race Seats

AP3X_FTW · 08-22-2018, 10:10 PM

Surprised to find that a search yielded few results with real useful information, and it would be nice to have a master seat hardware thread to compile everyone's thoughts and experiences.

I have had RECARO PP / SPG seats a couple times over the years, and each time I used the provided RECARO side mounts and sliders an paired them with Macht Schnell floor mounts. This time around I have RaceTech 4009HR (driver) & 4009W (passenger) seats with "stealth covers" coming, and not quite sure how I want to address hardware.

I will be running harnesses and hans, but will keep the factory 3 points in place for occasional weekend driving. I do not necessarily need sliders since this is not a daily driver, and I also like a lower seating position anyways (the stock E92 seats are like driving a school bus due to the folding mechanisms).

RECARO and Sparco seats, followed by Cobra seem to be the most popular within the M community, but who here is running RaceTech seats? I have heard a few times that you must purchase RaceTech's side mounts for their seats, is that true? Most race seat manufactures offer side mounts, and it probably makes sense just to go with them since they are made specially for their seats. Any objections?

What floor mounts do you like, and why? What has worked well for you, what has failed or caused problems? Little to no flex and safety is priority of course.

Popular Floor Mounts:
VAC
Macht Schnell
Wedge Engineering
Bimmerworld
Brey-Krause - Floor mounts and side mounts built in one. Leaning in this direction if I can get confirmation they work with the RT seats

For those running 6 pt harnesses, did you need to buy sub brackets additionally or were they designed into your seat base?

08-22-2018, 10:10 PM	#1
AP3X_FTW Captain 223 Rep 984 Posts Drives: E92 M3 Join Date: Dec 2008 Location: OC iTrader: (15)	Hardware For Race Seats - Master Guide Surprised to find that a search yielded few results with real useful information, and it would be nice to have a master seat hardware thread to compile everyone's thoughts and experiences. I have had RECARO PP / SPG seats a couple times over the years, and each time I used the provided RECARO side mounts and sliders an paired them with Macht Schnell floor mounts. This time around I have RaceTech 4009HR (driver) & 4009W (passenger) seats with "stealth covers" coming, and not quite sure how I want to address hardware. I will be running harnesses and hans, but will keep the factory 3 points in place for occasional weekend driving. I do not necessarily need sliders since this is not a daily driver, and I also like a lower seating position anyways (the stock E92 seats are like driving a school bus due to the folding mechanisms). RECARO and Sparco seats, followed by Cobra seem to be the most popular within the M community, but who here is running RaceTech seats? I have heard a few times that you must purchase RaceTech's side mounts for their seats, is that true? Most race seat manufactures offer side mounts, and it probably makes sense just to go with them since they are made specially for their seats. Any objections? What floor mounts do you like, and why? What has worked well for you, what has failed or caused problems? Little to no flex and safety is priority of course. Popular Floor Mounts: VAC Macht Schnell Wedge Engineering Bimmerworld Brey-Krause - Floor mounts and side mounts built in one. Leaning in this direction if I can get confirmation they work with the RT seats For those running 6 pt harnesses, did you need to buy sub brackets additionally or were they designed into your seat base? __________________ E46 ///M3 Race Car F15 X5 ///Msport For Sale - E92 M3 Full Black Interior Part Out Last edited by AP3X_FTW; 08-23-2018 at 12:32 AM..
	Appreciate 1 roastbeef11699.00 Tweet Quote