View Single Post
      08-22-2021, 12:46 PM   #20
2000cs
Captain
3532
Rep
1,004
Posts

Drives: Potato
Join Date: Feb 2012
Location: USA

iTrader: (1)

Mrs2000cs and I just completed today’s effort. We put duct tape over the weep holes and poured 3+ gallons of bleach into the tracks, applying it in all locations including doors open and closed. Let it sit over 30 minutes, then removed the tape and flushed with 4+ gallons of water from inside and hose from outside. Dislodged a lot of sand from the tracks (the drain gaps along the track). Sprayed with pressure all along the tracks, much to Mrs2000cs’ dismay as I got a bit of water inside when the door was open. About 20 minutes of flushing. Good flow out of the weep holes but mostly water and some sand, no signs of mold or slime having been dislodged.

Slight smell of bleach in the bedroom now. Will let it dry thoroughly and hope for the best. Will probably know in several days.

Still after a more permanent solution, but that may require getting some help and removing the doors. Also hopeful that the good folks at RMR Solutions might have something.
Appreciate 0