|
I took the headliner section out... its a little tricky to remove all of the cords but I did find some decent instructions at workshop-manuals dot com. Took me about 2 hours taking my time not to damage anything.
Two of the cords, one on each side, (see pic above) were really worn so I ordered some replacements from ECS for about $17. According to some other posts, these have been upgraded with stronger steel rope so it shouldn't wear out again so easily. See part number 54377277475.
I was able to epoxy all of the clips back on successfully, 15 total. I was careful to try to align them properly, hopefully the reinstall goes smoothly. I'll report back again after its done.
|