Quote:
Originally Posted by Villanofun
I guess my real question was whether that fuse is "hot in start." I was thinking that the motion detection would require continuous power; however, the camera may have a battery for that. I cannot really find information about the function specific to the HP F210.
I also want to know whether I can splice and solder the power cable myself to add in a fuse tap. Some websites offer a kit for this with what looks like some form of power converter ( https://thedashcamstore.com/product_...ni-fuse-5v.jpg) but I would like to avoid paying for that.
Last, I assume that all the fuses are ATO fuses? |
I would love to pay for the kit, depends on how much. Basically, it does the same thing as you run the wire yourself. Also, some of the 12V plug has circuit board in, so make sure you check that. To answer your "hot start" question, they are the same as your detector, so you dont have to worry too much on that and just make sure you tap into the right fuse. Otherwise, good luck and if you can find more info to help you that would be better.