Quote:
Originally Posted by fe7565
Yes, you are correct, if the OEM menu shows then the LVDS cables are ok.
APIX1 is the older video signal and will not work with APIX2 and vice versa. I believe yours is APIX1 which should work ok with the NBT MMI.
I would search the thread for DIP switch settings that others posted and fixed theirs. There are only a couple more setting options on that, not like infinitive. 11100000 what it should be. Try 01100000 or 00110000
Wild guess: 11110000, or 11000000
Unless your MCU file is messed up, or your CUST Version firmware is corrupt. But I would wait on that for the seller as they should have a better idea.
Are you sure your MMI is for NBT? Any markings? I assume you cannot see the firmware either because of the blank screen
|
I just found my old screen, so I've removed all the trim again and tried many different configurations with the old screen.
It seems that MMI menu is always shown correctly on the old 6.5 screen, no matter the dip switch combination (re-connected MMI every time I changed switches) :
00000000
11000000
11100000
11110000
but of course, the OEM menu is then not shown since I have coded it for 8.8.
However, with the mentioned DIP switch positions I never managed to get it to work with bigger screen, as if the MMI is ignoring the dip switches (only change I saw was when switch 4 was ON, I couldn't exit MMI screen).
I can additionally try the 01100000, as suggested.
I took a picture of SW version with the old screen connected (see attachment), as for the device, the box it came in says EW-LBMCP-NBT02B