|
Sounds like you have a separate issue not being able to read the CIC module.
That usually means something was skipped in the retrofit coding, hopefully the above mentioned will fix it.
Also consider that some harnesses that split behind the CIC HU sometimes blocks the ability to code the CIC. So youd have to uninstall the harness to code it.
I have the older version mr12volt with the CIC controller harness not the new one, so I can't confirm if this is the case or not. But android units usually have that problem. So something to consider. But if you always haven't been able to read the CIC module then it's probably due to steps omitted in the retrofit coding.
|