PSdZData Full vs. Lite

shawnsheridan · 09-10-2017, 08:34 PM

Quote:

Originally Posted by SalpacinoBMW

How to i code VO code and reset? And does that mean I need the PadZdata full version?

Really?

Quote:

Originally Posted by shawnsheridan

Reset the modules you coded by VO Coding them (right-click ECU select CODE).

And no, VO Coding is CODING not PROGRAMMING, so PSdZdata Full is not needed.

SalpacinoBMW · 09-10-2017, 09:44 PM

sorry i figure out what you were telling me to do, even though it is now obvious, and it did reset any coding i had but. But comfort access still wont lock my doors. Not sure if there is anything else i can try before taking to the dealer and seeing if they can fix. Another think After right clicking ECU and selecting Code, i am able to code the side markers delete but now that i try to code fold/unfold mirrors with key fob/CA it doesnt take it. It wont fold the mirrors anymore. Below are the current settings. Any clue would help. Thanks again for all your help

Module fuction Value
FEM_BODY ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN aktiv wert=01
FEM_BODY ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN AKTIV wert=01

SalpacinoBMW · 09-10-2017, 10:45 PM

and just too add to that, When i go back into code ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN and ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN revert back to nicht_aktiv even when i had changed it to aktiv

shawnsheridan · 09-11-2017, 10:01 AM

Quote:

Originally Posted by SalpacinoBMW

sorry i figure out what you were telling me to do, even though it is now obvious, and it did reset any coding i had but. But comfort access still wont lock my doors. Not sure if there is anything else i can try before taking to the dealer and seeing if they can fix. Another think After right clicking ECU and selecting Code, i am able to code the side markers delete but now that i try to code fold/unfold mirrors with key fob/CA it doesnt take it. It wont fold the mirrors anymore. Below are the current settings. Any clue would help. Thanks again for all your help

Module fuction Value
FEM_BODY ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN aktiv wert=01
FEM_BODY ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN AKTIV wert=01

If you VO Code FEM_BODY back to factory coding,Comfort Access should be working.

Quote:

Originally Posted by SalpacinoBMW

and just too add to that, When i go back into code ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN and ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN revert back to nicht_aktiv even when i had changed it to aktiv

Because you are using CODE instead of Code FDL.

SalpacinoBMW · 09-11-2017, 10:25 AM

Yeah this morning it look like CA to lock the doors is working again. I am using Code FDL after i Activate FA. I will try again tonight and see if i can make it happen. Thanks

SalpacinoBMW · 09-12-2017, 12:26 AM

So i was finally able to code the folding mirrors back. Looks like i was forgetting to KOMFORT_SCHLIESSEN from werte = 0F to werte = 00 . Once i did that it started working. Thanks again for all your help Shawn. Stand up guy.

shawnsheridan · 09-12-2017, 06:27 AM

Quote:

Originally Posted by SalpacinoBMW

So i was finally able to code the folding mirrors back. Looks like i was forgetting to KOMFORT_SCHLIESSEN from werte = 0F to werte = 00 . Once i did that it started working. Thanks again for all your help Shawn. Stand up guy.

d4ve86 · 09-13-2017, 12:22 PM

Hi Shawn,

Been following and trying the F SERIES coding, now looking to try flashing...

Can you please send me a link to the latest psdzdata full files?

Thank you!

shawnsheridan · 09-13-2017, 01:29 PM

Quote:

Originally Posted by d4ve86

Hi Shawn,

Been following and trying the F SERIES coding, now looking to try flashing...

Can you please send me a link to the latest psdzdata full files?

Thank you!

PM sent.

alexgarcia · 09-22-2017, 12:19 AM

Hi ShawnSheridan

I am new to the forum and new to the coding f30´s world. I was pointed out to this thread by RSnic as I am trying to get help on coding my 2016 320i for a fog led lights upgrade I just received today, part numbers:

63 17 7 315 559
63 17 7 315 560

I have no idea other than the required software and hardware list RSnic provided me with and I am having a hard time actually finging where to buy them. I was hoping you (or anyone as I would appreciate) could help me with some of the know how to do the purchase and secondly how to do the coding.

Finally I have some idea about the actual codes as I read in posts referring to the same upgrade but since I am new to all this I cant be sure these are what I need speaking of the codes themselves:

FEM_BODY

3061 NSW_R_KALTUEBERWACHUNG -> nicht_aktiv : LED Foglights front right
3061 NSW_R_WARMUEBERWACHUNG -> nicht_aktiv : LED Foglights front right
3061 NSW_R_IS_LED -> aktiv : LED Foglights front right
3062 MAPPING_ABBIEGEL_R_PWM_LEVEL_1 -> 100% : LED Foglights front right
3061 NSW_R_UE_SPG_SCHUTZ -> dimmed : LED Foglights front right
3063 MAPPING_NEBELSCHW_R_PWM_LEVEL_1 -> 100% : LED Foglights front right

3061 NSW_L_KALTUEBERWACHUNG -> nicht_aktiv : LED Foglights front left
3061 NSW_L_WARMUEBERWACHUNG -> nicht_aktiv : LED Foglights front left
3061 NSW_L_IS_LED -> aktiv : LED Foglights front left
3061 NSW_L_UE_SPG_SCHUTZ -> dimmed : LED Foglights front left
3063 MAPPING_NEBELSCHW_L_PWM_LEVEL_1 -> 100% : LED Foglights front left
3062 MAPPING_ABBIEGEL_L_PWM_LEVEL_1 -> 100% : LED Foglights front left

3062 MAPPING_abbiegel_L_output -> nsw_l : Foglight when turning
3062 Mapping_abbiegel_R_output -> nsw_r : Foglight when turning
3073 KL_ENABLE_RE -> KL_Ein : Foglight when turning
3066 KL_ENABLE_LI -> KL_Ein : Foglight when turning
3073 C_CLC_ENA -> enable : Foglight when turning
3073 C_BLC_ENA -> enable : Foglight when turning

3063 Mapping Nevelschw L Part of WL soft-on nicht_aktiv : Foglight left as welcome
3063 Mapping Nevelschw R Part of WL soft-on nicht_aktiv : Foglight right as welcome

shawnsheridan · 09-22-2017, 06:38 AM

Quote:

Originally Posted by alexgarcia

Hi ShawnSheridan

I am new to the forum and new to the coding f30´s world. I was pointed out to this thread by RSnic as I am trying to get help on coding my 2016 320i for a fog led lights upgrade I just received today, part numbers:

63 17 7 315 559
63 17 7 315 560

I have no idea other than the required software and hardware list RSnic provided me with and I am having a hard time actually finging where to buy them. I was hoping you (or anyone as I would appreciate) could help me with some of the know how to do the purchase and secondly how to do the coding.

Finally I have some idea about the actual codes as I read in posts referring to the same upgrade but since I am new to all this I cant be sure these are what I need speaking of the codes themselves:
...

Codes look correct. PM sent.

speed608 · 09-30-2017, 12:06 PM

Quote:

Originally Posted by jsouth

shawnsheridan, please PM the link to Lite. Thank you.

can you please assist with the link for latest psdz data lite .

shawnsheridan · 09-30-2017, 12:24 PM

Quote:

Originally Posted by speed608

can you please assist with the link for latest psdz data lite .

PM sent.

speed608 · 09-30-2017, 12:35 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thank you Shawn

eko_001 · 11-11-2017, 05:49 AM

can you please assist with the link for latest psdz data full.
Thx..

shawnsheridan · 11-11-2017, 08:25 AM

Quote:

Originally Posted by eko_001

can you please assist with the link for latest psdz data full.
Thx..

PM sent.

kcsmithcyril · 11-14-2017, 09:41 PM

Quote:

Originally Posted by shawnsheridan

Quote:

Originally Posted by eko_001

can you please assist with the link for latest psdz data full.
Thx..

PM sent.

Hi Shawn,

My aircon ventilation blow direction is not following the setting I selected, when engine started, there is air blow out from the leg but mine setting is blowing on top, wondering is coding can help me resolve this problem ? if yes, which coding line for this setup ? I cannot locate in cheat sheet.

Mine is F30 320i 2014 Dec.

Thanks in advance for the help.

Kenny Chan

shawnsheridan · 11-14-2017, 10:40 PM

Quote:

Originally Posted by k3nnychan

Hi Shawn,

My aircon ventilation blow direction is not following the setting I selected, when engine started, there is air blow out from the leg but mine setting is blowing on top, wondering is coding can help me resolve this problem ? if yes, which coding line for this setup ? I cannot locate in cheat sheet.

Mine is F30 320i 2014 Dec.

Thanks in advance for the help.

Kenny Chan

Sorry, I do not know of any Coding to alter this.

kcsmithcyril · 11-14-2017, 10:42 PM

Quote:

Originally Posted by shawnsheridan

Quote:

Originally Posted by k3nnychan

Hi Shawn,

My aircon ventilation blow direction is not following the setting I selected, when engine started, there is air blow out from the leg but mine setting is blowing on top, wondering is coding can help me resolve this problem ? if yes, which coding line for this setup ? I cannot locate in cheat sheet.

Mine is F30 320i 2014 Dec.

Thanks in advance for the help.

Kenny Chan

Sorry, I do not know of any Coding to alter this.

Hi Shawn,

Thanks for the prompt reply, seem like need to visit dealer, haha.

Good day !

Kenny Chan

shawnsheridan · 11-14-2017, 11:01 PM

Quote:

Originally Posted by k3nnychan

Hi Shawn,

Thanks for the prompt reply, seem like need to visit dealer, haha.

Good day !

Kenny Chan

Good luck.

Chri996 · 11-17-2017, 12:58 PM

Hi!

can you please assist with the link for latest psdz data full?
Thank you!

shawnsheridan · 11-17-2017, 02:39 PM

Quote:

Originally Posted by Chri996

Hi!

can you please assist with the link for latest psdz data full?
Thank you!

PM sent.

09-10-2017, 09:44 PM	#442
SalpacinoBMW Private 14 Rep 51 Posts Drives: 2012 335i Sedan Join Date: Jun 2015 Location: Tustin, CA iTrader: (0)	sorry i figure out what you were telling me to do, even though it is now obvious, and it did reset any coding i had but. But comfort access still wont lock my doors. Not sure if there is anything else i can try before taking to the dealer and seeing if they can fix. Another think After right clicking ECU and selecting Code, i am able to code the side markers delete but now that i try to code fold/unfold mirrors with key fob/CA it doesnt take it. It wont fold the mirrors anymore. Below are the current settings. Any clue would help. Thanks again for all your help Module fuction Value FEM_BODY ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN aktiv wert=01 FEM_BODY ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN AKTIV wert=01
	Appreciate 0 Quote

09-10-2017, 10:45 PM	#443
SalpacinoBMW Private 14 Rep 51 Posts Drives: 2012 335i Sedan Join Date: Jun 2015 Location: Tustin, CA iTrader: (0)	and just too add to that, When i go back into code ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN and ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN revert back to nicht_aktiv even when i had changed it to aktiv
	Appreciate 0 Quote

09-11-2017, 10:25 AM	#445
SalpacinoBMW Private 14 Rep 51 Posts Drives: 2012 335i Sedan Join Date: Jun 2015 Location: Tustin, CA iTrader: (0)	Yeah this morning it look like CA to lock the doors is working again. I am using Code FDL after i Activate FA. I will try again tonight and see if i can make it happen. Thanks
	Appreciate 0 Quote

09-12-2017, 12:26 AM	#446
SalpacinoBMW Private 14 Rep 51 Posts Drives: 2012 335i Sedan Join Date: Jun 2015 Location: Tustin, CA iTrader: (0)	So i was finally able to code the folding mirrors back. Looks like i was forgetting to KOMFORT_SCHLIESSEN from werte = 0F to werte = 00 . Once i did that it started working. Thanks again for all your help Shawn. Stand up guy.
	Appreciate 0 Quote

09-13-2017, 12:22 PM	#448
d4ve86 New Member 0 Rep 8 Posts Drives: F31 330d xDrive Join Date: Sep 2017 Location: Essex iTrader: (0)	Hi Shawn, Been following and trying the F SERIES coding, now looking to try flashing... Can you please send me a link to the latest psdzdata full files? Thank you!
	Appreciate 0 Quote

09-22-2017, 12:19 AM	#450
alexgarcia New Member 2 Rep 12 Posts Drives: 2016 320i base sedan Join Date: Sep 2017 Location: SLP, Mexico iTrader: (0)	Coding Questions from a New User Hi ShawnSheridan I am new to the forum and new to the coding f30´s world. I was pointed out to this thread by RSnic as I am trying to get help on coding my 2016 320i for a fog led lights upgrade I just received today, part numbers: 63 17 7 315 559 63 17 7 315 560 I have no idea other than the required software and hardware list RSnic provided me with and I am having a hard time actually finging where to buy them. I was hoping you (or anyone as I would appreciate) could help me with some of the know how to do the purchase and secondly how to do the coding. Finally I have some idea about the actual codes as I read in posts referring to the same upgrade but since I am new to all this I cant be sure these are what I need speaking of the codes themselves: FEM_BODY 3061 NSW_R_KALTUEBERWACHUNG -> nicht_aktiv : LED Foglights front right 3061 NSW_R_WARMUEBERWACHUNG -> nicht_aktiv : LED Foglights front right 3061 NSW_R_IS_LED -> aktiv : LED Foglights front right 3062 MAPPING_ABBIEGEL_R_PWM_LEVEL_1 -> 100% : LED Foglights front right 3061 NSW_R_UE_SPG_SCHUTZ -> dimmed : LED Foglights front right 3063 MAPPING_NEBELSCHW_R_PWM_LEVEL_1 -> 100% : LED Foglights front right 3061 NSW_L_KALTUEBERWACHUNG -> nicht_aktiv : LED Foglights front left 3061 NSW_L_WARMUEBERWACHUNG -> nicht_aktiv : LED Foglights front left 3061 NSW_L_IS_LED -> aktiv : LED Foglights front left 3061 NSW_L_UE_SPG_SCHUTZ -> dimmed : LED Foglights front left 3063 MAPPING_NEBELSCHW_L_PWM_LEVEL_1 -> 100% : LED Foglights front left 3062 MAPPING_ABBIEGEL_L_PWM_LEVEL_1 -> 100% : LED Foglights front left 3062 MAPPING_abbiegel_L_output -> nsw_l : Foglight when turning 3062 Mapping_abbiegel_R_output -> nsw_r : Foglight when turning 3073 KL_ENABLE_RE -> KL_Ein : Foglight when turning 3066 KL_ENABLE_LI -> KL_Ein : Foglight when turning 3073 C_CLC_ENA -> enable : Foglight when turning 3073 C_BLC_ENA -> enable : Foglight when turning 3063 Mapping Nevelschw L Part of WL soft-on nicht_aktiv : Foglight left as welcome 3063 Mapping Nevelschw R Part of WL soft-on nicht_aktiv : Foglight right as welcome
	Appreciate 0 Quote

11-11-2017, 05:49 AM	#455
eko_001 Registered 0 Rep 2 Posts Drives: G30 Join Date: Oct 2017 Location: DE iTrader: (0)	can you please assist with the link for latest psdz data full. Thx..
	Appreciate 0 Quote

11-17-2017, 12:58 PM	#461
Chri996 New Member 0 Rep 12 Posts Drives: 2014 F31 320d xDrive Join Date: Nov 2017 Location: Austria iTrader: (0)	Hi! can you please assist with the link for latest psdz data full? Thank you!
	Appreciate 0 Quote