Wrapped my steering wheel trim for $10

[to///m]

Ive been seeing threads asking about solutions to the steering wheel trim pealing problem and I had the same issue. I figured wrapping the trim wouldn't be that hard so I ordered some carbon dinoc looking stuff off ebay for 10 bucks thinking, what the heck, mine as well give it a shot for that cheap. I ordered the matte black carbon to try and match my other interior trim as close as possible.

The material is actually very easy to work with. It has some stretch to it, so i could stretch the wrap around the curves for a nice tight fit. I didn't use a heat gun or anything like that, my only tool was literally just a knife (Spyderco Paramilitary 2 for any of knife guys lol).

Anyways, here are some pictures and Im extremely happy with how it turned out. And it actually matches the other interior trim pretty well! Im about to detail the shit out of the inside, so I know its not clean


In low light

In day light

Trying to show how it matched the other trim somewhat

[rAdzM]

looks great!

[M3Carbon]

Nice job! Another successful DIY.

[Stark7x]

Looks nice. I did this on my e46 a while back.

[///M Power-Belgium]

This is very nice work,even the details(edges)around the buttons are just a perfect cut !
But....our CF dash trim texture is going from the left to the right side and on your steering wheel it's the other way,so i'm not sure if this would be possible , but then the match with your dash trim would be even better ?
And one thing...the leather of your steering wheel(it's shiny) could use some "Leatherique Rejuvenator", the whole picture would than just flawless !(i think it's just me )
Anyway congrats man !

[to///m]

Originally Posted by rAdzM

looks great!

Originally Posted by M3Carbon

Nice job! Another successful DIY.

Originally Posted by Robert7x

Looks nice. I did this on my e46 a while back.

Thanks guys!

Originally Posted by ///M Power-Belgium

This is very nice work,even the details(edges)around the buttons are just a perfect cut !
But....our CF dash trim texture is going from the left to the right side and on your steering wheel it's the other way,so i'm not sure if this would be possible , but then the match with your dash trim would be even better ?
And one thing...the leather of your steering wheel(it's shiny) could use some "Leatherique Rejuvenator", the whole picture would than just flawless !(i think it's just me )
Anyway congrats man !

I know man lol I saw that when i was looking back through the pictures, i guess i could have wrapped it the other direction, but oo well... ill see how this holds up and if it gets any blemishes, ill wrap it again the other direction!

Thanks for the leather cleaner tip, i was actually heading to advanced auto parts to get some interior detail stuff and ill pick something up... my seats are still somewhat matte but i need to do it to all leather pieces

[///M Power-Belgium]

Originally Posted by to///m

Thanks guys!



I know man lol I saw that when i was looking back through the pictures, i guess i could have wrapped it the other direction, but oo well... ill see how this holds up and if it gets any blemishes, ill wrap it again the other direction!

Thanks for the leather cleaner tip, i was actually heading to advanced auto parts to get some interior detail stuff and ill pick something up... my seats are still somewhat matte but i need to do it to all leather pieces

The best leather tip for our Novillo leather is here >my threadhttp://www.m3post.com/forums/showthread.php?t=768340

[dozaiya]

diy the center console as well!

[M3ANMACHINE]

Looks great aside from the wheel trim going the opposite direction than the dash!

[krayzie]

Was it hard to remove the trim? Do you need to remove the horn/airbag?
Anyone have a guide?

[to///m]

Originally Posted by M3ANMACHINE

Looks great aside from the wheel trim going the opposite direction than the dash!

I know, i didnt notice it until i had everything back together. But i really dont even notice it "in action"

Originally Posted by krayzie

Was it hard to remove the trim? Do you need to remove the horn/airbag?
Anyone have a guide?

no not hard, yes you do have to remove the airbag but its easy too.
there are 3 screws behind the steering wheel that you have to unscrew for the trim... as for the airbag removal, look at this guide:http://www.m3post.com/forums/showthread.php?t=242963

[Articsilber323]

can you post the link to the wrap you bought from ebay?

[TizSuperrQ]

Looks great.. I think I'll try!

[aussiem3]

Originally Posted by ///M Power-Belgium

This is very nice work,even the details(edges)around the buttons are just a perfect cut !
But....our CF dash trim texture is going from the left to the right side and on your steering wheel it's the other way,so i'm not sure if this would be possible , but then the match with your dash trim would be even better ?
And one thing...the leather of your steering wheel(it's shiny) could use some "Leatherique Rejuvenator", the whole picture would than just flawless !(i think it's just me )
Anyway congrats man !

Good observation Philippe. How have you been ... haven't heard from you for a while!

[FormulaMMM]

Nice work!

[vastano]

Originally Posted by Articsilber323

can you post the link to the wrap you bought from ebay?

its just 3M di-noc in 'dry' carbon fiber:

here is a 1'x2' piece, keep searching if you want more or less:

http://www.ebay.com/itm/3M-DiNoc-Bla...7fdeb1&vxp=mtr

[to///m]

Originally Posted by vastano

its just 3M di-noc in 'dry' carbon fiber:

here is a 1'x2' piece, keep searching if you want more or less:

http://www.ebay.com/itm/3M-DiNoc-Bla...7fdeb1&vxp=mtr

Originally Posted by Articsilber323

can you post the link to the wrap you bought from ebay?

I actually bought this stuff, i think its a knock off from the 3M i believe, but its great. Its strong but has some stretch to work with: http://www.ebay.com/itm/140890239499...84.m1439.l2649

[RimasRS]

I looks like the cost was 10$
I mean it looks more less ok, but everybody knows that it is wrap and that it is not oem and that the price was 10$

[to///m]

Originally Posted by RimasRS

I looks like the cost was 10$
I mean it looks more less ok, but everybody knows that it is wrap and that it is not oem and that the price was 10$

and your point???

So if it would have looked the same and i said i paid $100 you would have felt better?

Maybe my shitty iphone pics are throwing it off, it actually looks quality in person

[RimasRS]

Originally Posted by to///m

and your point???

So if it would have looked the same and i said i paid $100 you would have felt better?

Maybe my shitty iphone pics are throwing it off, it actually looks quality in person

no really it looks not bad
But as I said you can clearly see it is wrap and that is why it looks cheap. It does not matter how much you paid.
I like to look at it but I hate to know that it is wrap if you get my point.

[W///]

Ok I'm sold. My trims is peeling really bad, and I'm surprised it's taken me this long to do something about it. Going to wrap mine is black alcantara.

[MPowerZ32]

Wait a minute... The steering trim carbon doesn't align with the pattern of the dash. They are opposite. If you rotate the steering pattern clock wise 90 degress, they will match. I'm OCD... The wrap looks great.