Vorsteiner V-FF 103 offset spacer

grebski · 07-11-2015, 07:59 PM

I'm trading a guy for a set of VFF103 wheels on his M3. he's running 5mm spacers in the front and says the offset was meant for a 335i so I think he said et 22.

the tpms is hitting on the calipers in the front just a little and bent in the fill spot maybe a tad.

what size spacer should I run in the front? 10mm? 15mm?

Amirsm3 · 07-12-2015, 01:02 AM

Wait how is the tpms hitting the caliper?

grebski · 07-12-2015, 02:25 AM

Quote:

Originally Posted by Amirsm3

Wait how is the tpms hitting the caliper?

has 335i offset and vorsteiner puts valve stems on inside of the wheel near the hub. design flaw honestly

Amirsm3 · 07-12-2015, 08:35 AM

This guy have an ad up?

grebski · 07-12-2015, 11:16 AM

Quote:

Originally Posted by Amirsm3

This guy have an ad up?

no he's local

Amirsm3 · 07-12-2015, 11:36 AM

I'm looking at the valve stem hole for the VFF 103 and they look like they're in a normal spot.

Any chance that dude can snap you some pics and you can post them in here?

As far as the offset being non-M specific, you'll need at least a 10mm spacer to close up the gap.

grebski · 07-12-2015, 05:52 PM

Quote:

Originally Posted by Amirsm3

I'm looking at the valve stem hole for the VFF 103 and they look like they're in a normal spot.

Any chance that dude can snap you some pics and you can post them in here?

As far as the offset being non-M specific, you'll need at least a 10mm spacer to close up the gap.

can you run 15mm spacers without rubbing? I'd be running 235/35/19 and lowered on eiback springs

Amirsm3 · 07-12-2015, 05:56 PM

Quote:

Originally Posted by grebski

can you run 15mm spacers without rubbing? I'd be running 235/35/19 and lowered on eiback springs

It honestly just depends on the specs of the wheels you're picking up.

grebski · 07-12-2015, 09:12 PM

Quote:

Originally Posted by Amirsm3

Quote:

Originally Posted by grebski

can you run 15mm spacers without rubbing? I'd be running 235/35/19 and lowered on eiback springs

It honestly just depends on the specs of the wheels you're picking up.

the front.of 3 series offset

Amirsm3 · 07-15-2015, 03:18 PM

I don't know what offsets those are, broski. Any chance you can have him send you the full specs?

grebski · 07-15-2015, 03:58 PM

Quote:

Originally Posted by Amirsm3

I don't know what offsets those are, broski. Any chance you can have him send you the full specs?

turns out they werent vorsteiner and were a look alike. not trading anymore.

Amirsm3 · 07-18-2015, 11:33 AM

Quote:

Originally Posted by grebski

turns out they werent vorsteiner and were a look alike. not trading anymore.

Yeah I was gonna say, the valve stem on the pictures showed it is drilled in the "normal" position.

Vorsteiner_Info · 08-12-2015, 05:59 PM

Luckily you checked and found out! Be-careful out there guys. A lot of look alike these days.

07-11-2015, 07:59 PM	#1
grebski Honey Badger 25 Rep 322 Posts Drives: 2007 E92 335i Join Date: Aug 2014 Location: San Diego iTrader: (6)	Vorsteiner V-FF 103 offset spacer I'm trading a guy for a set of VFF103 wheels on his M3. he's running 5mm spacers in the front and says the offset was meant for a 335i so I think he said et 22. the tpms is hitting on the calipers in the front just a little and bent in the fill spot maybe a tad. what size spacer should I run in the front? 10mm? 15mm?
	Appreciate 0 Tweet Quote

07-12-2015, 01:02 AM	#2
Amirsm3 Brigadier General 514 Rep 3,482 Posts Drives: 2011 Space Grey e90 M3 Join Date: Feb 2014 Location: Williams/Flagstaff, AZ iTrader: (3)	Wait how is the tpms hitting the caliper? __________________ 2011 e90 M3 Space Grey DCT ZCP- eAs, BMW Performance, Agency Power, Macht Schnell, iND, Milltek, Volk, Challenge, Stoptech, Ohlins BMWCCA:518970
	Appreciate 0 Quote

07-12-2015, 08:35 AM	#4
Amirsm3 Brigadier General 514 Rep 3,482 Posts Drives: 2011 Space Grey e90 M3 Join Date: Feb 2014 Location: Williams/Flagstaff, AZ iTrader: (3)	This guy have an ad up? __________________ 2011 e90 M3 Space Grey DCT ZCP- eAs, BMW Performance, Agency Power, Macht Schnell, iND, Milltek, Volk, Challenge, Stoptech, Ohlins BMWCCA:518970
	Appreciate 0 Quote

07-12-2015, 11:36 AM	#6
Amirsm3 Brigadier General 514 Rep 3,482 Posts Drives: 2011 Space Grey e90 M3 Join Date: Feb 2014 Location: Williams/Flagstaff, AZ iTrader: (3)	I'm looking at the valve stem hole for the VFF 103 and they look like they're in a normal spot. Any chance that dude can snap you some pics and you can post them in here? As far as the offset being non-M specific, you'll need at least a 10mm spacer to close up the gap. __________________ 2011 e90 M3 Space Grey DCT ZCP- eAs, BMW Performance, Agency Power, Macht Schnell, iND, Milltek, Volk, Challenge, Stoptech, Ohlins BMWCCA:518970
	Appreciate 0 Quote

07-15-2015, 03:18 PM	#10
Amirsm3 Brigadier General 514 Rep 3,482 Posts Drives: 2011 Space Grey e90 M3 Join Date: Feb 2014 Location: Williams/Flagstaff, AZ iTrader: (3)	I don't know what offsets those are, broski. Any chance you can have him send you the full specs? __________________ 2011 e90 M3 Space Grey DCT ZCP- eAs, BMW Performance, Agency Power, Macht Schnell, iND, Milltek, Volk, Challenge, Stoptech, Ohlins BMWCCA:518970
	Appreciate 0 Quote

08-12-2015, 05:59 PM	#13
Vorsteiner_Info Second Lieutenant 189 Rep 252 Posts Drives: bmw Join Date: Mar 2015 Location: Garden Grove iTrader: (0)	Luckily you checked and found out! Be-careful out there guys. A lot of look alike these days.
	Appreciate 0 Quote