|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
07-21-2014, 06:26 AM | #23 | |
Lieutenant Colonel
233
Rep 1,673
Posts |
Quote:
__________________
Electronics Junkie, Engine Builder.
|
|
Appreciate
0
|
07-21-2014, 11:57 AM | #24 | |
Private First Class
18
Rep 177
Posts |
Quote:
Thanks |
|
Appreciate
0
|
07-23-2014, 02:59 PM | #25 |
Private First Class
18
Rep 177
Posts |
Just an update -
Ordered F14 SDC Piano Black Front 19x9.5 ET+23 ~ Yokohama AD08R 275/30/19 Rear 19x11 ET+27 ~ Yokohama AD08R 305/30/19 Wheels should be here from USA in around 3-4 Weeks. I will post pictures once they are on and let you guys know on how they fit and if i have any rubbing issues. I think they should be ok though. Thanks for everyones input on this thread, i really appreciate it. Thanks |
Appreciate
0
|
07-23-2014, 10:04 PM | #26 |
Captain
103
Rep 999
Posts |
Nice wheels! Lol I have the same.
19x10+25 with a 275/30 19x11+33 with a 305/30 No rubbing what so ever. Gonna buy coilovers after my deployment.
__________________
Performance ESS 625 VT2 Supercharger - CAE Shifter - Revinora race+ axle back - Macht Schnell down pipes - SOSI X-pipe Looks M colors grill - CF trunk - Sapphire Blue Forgestars F14 |
Appreciate
0
|
07-26-2014, 02:20 AM | #27 | |
Private First Class
18
Rep 177
Posts |
Quote:
post some pics please i want to check them out ! I'm going 19x11 et27 in the rear with 305/30/19 yoko ad08r. do you think this will rub or will i be ok? |
|
Appreciate
0
|
07-26-2014, 10:56 AM | #28 | ||
Captain
103
Rep 999
Posts |
Quote:
__________________
Performance ESS 625 VT2 Supercharger - CAE Shifter - Revinora race+ axle back - Macht Schnell down pipes - SOSI X-pipe Looks M colors grill - CF trunk - Sapphire Blue Forgestars F14 |
||
Appreciate
0
|
07-26-2014, 10:57 AM | #29 |
Captain
103
Rep 999
Posts |
Some
More
__________________
Performance ESS 625 VT2 Supercharger - CAE Shifter - Revinora race+ axle back - Macht Schnell down pipes - SOSI X-pipe Looks M colors grill - CF trunk - Sapphire Blue Forgestars F14 |
Appreciate
0
|
07-26-2014, 12:19 PM | #30 | |
Private First Class
18
Rep 177
Posts |
Quote:
19x11 et27 is by forgestars own recommendation but I'm not convinced or too sure that it is going to work as i am reading so many differing opinions on the net. I made them aware that i will b going with a BBK and told them the tyre sizes so I'm hoping they get it spot on. They are the manufacturer i suppose but i still am a bit unsure hence the reason for asking around |
|
Appreciate
0
|
07-26-2014, 03:38 PM | #31 | ||
Captain
103
Rep 999
Posts |
Quote:
__________________
Performance ESS 625 VT2 Supercharger - CAE Shifter - Revinora race+ axle back - Macht Schnell down pipes - SOSI X-pipe Looks M colors grill - CF trunk - Sapphire Blue Forgestars F14 |
||
Appreciate
0
|
08-03-2014, 12:22 PM | #32 |
Private First Class
18
Rep 177
Posts |
Guys ? Some urgent help please !
I have ordered F14 Forgestar with offsets that Forgestar have themselves recommended. I need some help to confirm wether i am going to run into any problems with the below specs as i have read some horror stories on other forums where Forgestar have suggested width and offsets, and when these have caused rubbing issues there customer service disappears and no refunds are given. I am still within my rights to back out of the deal if i want to as i am already losing faith with them before the wheels have even started to be manufactured. Received email from vendor that my original wait time of 3 weeks is now 7 weeks. The sizes they have recommended for - E92 M3 Stock Height Stock Alignment Tyres i want to run - Yokohama AD08R 275/30/19 front 305/30/19 rear Forgestar recommends - Front - 19x9.5 et23 Rear - 19x11 et27 They have recommended the above based on myself wanting to fit BBK in future. Can someone chime in on wether these will fit or rub? Btw there are a bunch of negative threads about Forgestar all over the net, has anyone ever dealt with these guys ? Im kinda worried as I'm paying the equivalent to $3200 including shipping to UK, to me thats a lot of money. I understand that negative stories make the internet more often as a happy customer would rarely post and praise a company but it has caused me some concern. Also i have tried to contact forgestar directly in regards to this, and they have not replied to me at all by email or phone. Any help would be greatly appreciated as I'm close to cancelling my order. Thanks Last edited by Johnny1987; 08-03-2014 at 01:51 PM.. Reason: Missed out a bit of info |
Appreciate
0
|
08-03-2014, 01:50 PM | #33 |
Major
146
Rep 1,201
Posts |
On stock ride height/alignment, you should be ok IMO. If you lower the car any, you're going to have trouble in the back depending on how wide that brand of tire runs and maybe slight rub in the front.
If you see my sig, I ran a 265 in the front because I would most likely have rubbed on a 275 at full lock. I run a 295/30 in the rear and it barely fits; it rubs on very harsh bumps at high speed; but only barely. 305s would have definitely rubbed, it was recommended that I run a +33 in the rear for 305s; but Michelin PSS runs wide.
__________________
'08 E90 w/ just boltons
'09 Z4 sDrive35i w/ just boltons |
Appreciate
0
|
08-04-2014, 01:51 PM | #34 | |
Private First Class
18
Rep 177
Posts |
Quote:
I just found out that me 19x9.5j front is actually et18 and not et23. Seems to aggressive? |
|
Appreciate
0
|
08-05-2014, 06:17 AM | #35 |
Private First Class
28
Rep 122
Posts |
this thread is proving to be very helpful....
I have set of 19 X 10.5 +22 for the rears also on its way, also wanting to throw some 305s on them but dont think it will work after reading through the posts... any thoughts ? |
Appreciate
0
|
08-05-2014, 06:54 AM | #36 |
Lieutenant Colonel
233
Rep 1,673
Posts |
No way, local guy has the same wheels and offset and he just rubs with 295. Not lowered either.
__________________
Electronics Junkie, Engine Builder.
|
Appreciate
0
|
08-05-2014, 09:15 AM | #37 |
Major General
2738
Rep 6,734
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
Not too aggressive with -2.0 camber. I have ran as low as 9.5" et15 with 275 mm tires without rubbing. In fact KW clubsports require about et19 to clear the inner spring with 275's.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
Appreciate
0
|
08-05-2014, 09:17 AM | #38 | |
Major General
2738
Rep 6,734
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
Quote:
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
|
Appreciate
0
|
08-05-2014, 09:22 AM | #39 |
Major General
2738
Rep 6,734
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
It will be very tight. I run 295's on 11" et25 and I rub the fender liner slightly on big dips. I would never be able to fit 305's. I would spec et30 if you want to run 305's. Alternatively you could run 295's with your current spec. A 295 ad08 is about as wide as a typical 305. They are very wide and square tires.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
Appreciate
0
|
08-05-2014, 02:56 PM | #40 | |
Private First Class
18
Rep 177
Posts |
Quote:
Im seriously considering changing my order to fit an et30. My car is stock height at the moment. do u think the 3mm from et30 to et27 will make a huge difference? it seems like such a minimal amount. The reason i ask is because i already have the tyres which i cannot exchange, but i can still alter the order on the offsets. Would adding neg camber in the rear do much with an et27? The wheels are super deep concave so I'm trying to go with the lowest offset possible for concavity whilst still fitting 305 in the rear. This is slowly turning into a 305 thread |
|
Appreciate
0
|
08-05-2014, 03:20 PM | #41 | |
Major General
2738
Rep 6,734
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
Quote:
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M Last edited by slicer; 08-06-2014 at 07:26 PM.. |
|
Appreciate
0
|
08-05-2014, 08:13 PM | #42 |
Major
146
Rep 1,201
Posts |
+18 on 9.5 fronts is pretty aggressive. I highly doubt you'll fit a 275 even on stock ride height. My wheel specs are in my sig.
__________________
'08 E90 w/ just boltons
'09 Z4 sDrive35i w/ just boltons |
Appreciate
0
|
08-05-2014, 08:14 PM | #43 | |
Major
146
Rep 1,201
Posts |
Quote:
Michelin PSS are also wide/square tires. 295s fit like a normal 305.
__________________
'08 E90 w/ just boltons
'09 Z4 sDrive35i w/ just boltons |
|
Appreciate
0
|
08-06-2014, 08:45 AM | #44 |
Lieutenant Colonel
233
Rep 1,673
Posts |
One other thing, I was informed by forgestar that anything higher than a 27 offset could not be done on the Super Deep wheels. Going to a 30-33 offset had to be standard Deep. This is why I canceled my order with them.
Optimum for me is 19x10-25 275/30-19 (20 offset for KW) 19x11-27 295/30-19
__________________
Electronics Junkie, Engine Builder.
Last edited by kawasaki00; 08-06-2014 at 08:51 AM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|