MPE to another setup?

Est-ce que quelqu'un a changé d'une MPE à une autre configuration qu'ils aiment encore plus?
J'aime vraiment le son du MPE, il a un bon grognement profond au démarrage et ce n'est pas désagréablement fort, mais j'ai l'impression que je veux quelque chose d'un peu plus fort.

Beaucoup de gens m'ont dit d'obtenir des tuyaux d'essai, mais je ne sais pas quelle différence cela fera dans le son.
J'ai regardé beaucoup de vidéos youtube sur différentes configurations d'échappement, mais il est très difficile de mesurer leur son dans la vie réelle.

J'envisage des options pour Meisterschaft GT2, Armytrix et IPE

Je viens d'installer des tuyaux de test sur mon MPE. Vous remarquerez une augmentation de volume, peut-être 30% ou plus, mais je pense que le plus grand changement est dans le ton de l'échappement. Les tuyaux d'essai rendront le son "creux" de la signature plus prononcé et apparent dans une plage de régime plus large. Vous aurez une légère râpe sur les rétrogradages et des accélérations modérées à dures, mais c'est un bon son plutôt que rebutant. Cela étant dit, je viens d'un échappement Akra (également avec des tuyaux de test), je pense que le MPE semble plus exotique, mais les deux sont uniques à leur manière. FWIW, le look du MPE n'est pas mon préféré (préférez l'Akra à cet égard).

MPE avec des tuyaux d'essai est également facile à conduire "sous le radar" quand vous avez besoin d'être. Il ne sera pas très fort dans des conditions de conduite normales, mais il semble incroyable quand vous obtenez sur elle.

s14_kev a écrit

Je viens d'installer des tuyaux de test sur mon MPE. Vous remarquerez une augmentation de volume, peut-être 30% ou plus, mais je pense que le plus grand changement est dans le ton de l'échappement. Les tuyaux d'essai rendront le son "creux" de la signature plus prononcé et apparent dans une plage de régime plus large. Vous aurez une légère râpe sur les rétrogradages et des accélérations modérées à dures, mais c'est un bon son plutôt que rebutant. Cela étant dit, je viens d'un échappement Akra (également avec des tuyaux de test), je pense que le MPE semble plus exotique, mais les deux sont uniques à leur manière. FWIW, le look du MPE n'est pas mon préféré (préférez l'Akra à cet égard).

MPE avec des tuyaux d'essai est également facile à conduire "sous le radar" quand vous avez besoin d'être. Il ne sera pas très fort dans des conditions de conduite normales, mais il semble incroyable quand vous obtenez sur elle.

Je pense que vous avez raison quand vous dites que le MPE semble plus exotique, maintenant je penche pour le garder et obtenir les tuyaux d'essai.

Pourriez-vous partager quelques vidéos de votre son ?

mrspecter wrote

I think you're kinda right when you say that the MPE sounds more exotic, now I'm leaning towards keeping it and getting the test pipes.

Would you be able to share some videos of your sound?

I took some vids with a GoPro and external mic, but they didn't turn out that great. I want to shoot better videos, but I'm not sure if I'll have time any time soon.

Here is my Akra for comparison (admittedly not a great comparison, diff camera/mic setup):

s14_kev wrote

I took some vids with a GoPro and external mic, but they didn't turn out that great. I want to shoot better videos, but I'm not sure if I'll have time any time soon.

Here is my Akra for comparison (admittedly not a great comparison, diff camera/mic setup):

Thanks for sharing the videos, very helpful. I don't know what it is about the Akra exhaust, but to me it sounds a little muted, tame, but it does have sort of a deeper tone.
Did you like it? Was it worth it? And why did you decide to change the setup?

Left the MPE for bomiz valvetronic muffler. MPE was nice, just too quiet for fun.

I am in the exact same boat OP! I think I will go with test pipes. I really don't want to spend money and end up with something that I feel is too loud.

mrspecter wrote

Thanks for sharing the videos, very helpful. I don't know what it is about the Akra exhaust, but to me it sounds a little muted, tame, but it does have sort of a deeper tone.
Did you like it? Was it worth it? And why did you decide to change the setup?

Akra is on the quieter end for sure. It definitely has a low RPM "boominess", but seems to fade out at higher RPMs.

As I said before, I liked how it looked, the CF tips are seriously works of art. To me, it was not worth it because I wasn't blown away by the sound, which is the main reason why we buy exhausts right? It didn't open up the V8 sound like the MPE does. Don't get me wrong, it sounds really unique, but I only really like the Akra sound with the GT4 x-pipe.

I sold the SG car and parted out the Akra beforehand. I bought the AW and it came with the MPE already installed. I just added the test pipes recently

PKL wrote

I am in the exact same boat OP! I think I will go with test pipes. I really don't want to spend money and end up with something that I feel is too loud.

It's nice to hear someone is on the same boat. Let me know what you eventually decide to do and post some videos of the sound if you could. By the way, which test pipes are you considering? I know there's quite a few options out there.

Considering test pipes as well but don't have a MPE cat back. Are you considering primary or secondary cat delete? Or both?

Also stumbled upon this old thread while researching around, considering it over test pipes as it's essentially free and like OP had mentioned not trying to drop a grand on a set-up that I don't like.

https://www.m3post.com/forums/showthread.php?t=457202

JP10 wrote

Considering test pipes as well but don't have a MPE cat back. Are you considering primary or secondary cat delete? Or both?

Also stumbled upon this old thread while researching around, considering it over test pipes as it's essentially free and like OP had mentioned not trying to drop a grand on a set-up that I don't like.

https://www.m3post.com/forums/showthread.php?t=457202

Couple things:
Test pipes are ~200 on the used market and 400 brand new. If you can DIY the secondary cat gutting, you have the tools to DIY the test pipe install as well. If not, then the secondary cat delete will require similar / more labor for a shop to do.

Power/Tq gains from test pipes are substantially more.

Test pipes are fully reversible as long as you keep the stock cats. The secondary cat delete will be more of a permanent mod. This is something to keep in mind if you're worried you won't like the result.

Plus side to secondary cat delete:
Test pipes will throw a CEL without a tune, secondary cat will not.

Secondary cat gutting will look stock underneath.

JP10 wrote

Considering test pipes as well but don't have a MPE cat back. Are you considering primary or secondary cat delete? Or both?

Also stumbled upon this old thread while researching around, considering it over test pipes as it's essentially free and like OP had mentioned not trying to drop a grand on a set-up that I don't like.

https://www.m3post.com/forums/showthread.php?t=457202

I'm probably just only considering primary cat delete. At first I didn't really want to mess with the cats, but with test pipes it'll be inevitable, which means I'll need to get a tune to deal with the CEL and to pass NY state inspection which is a pain in the ass.

My brother has a heavily modified C63 AMG and I cannot deal with the smell that it makes. I cannot drive behind him at all and when I ride inside the car with him, the smell makes it unbearable. The smell is a huge concern for me, which is why I'm a bit hesitant.

s14_kev wrote

Couple things:
Test pipes are ~200 on the used market and 400 brand new. If you can DIY the secondary cat gutting, you have the tools to DIY the test pipe install as well. If not, then the secondary cat delete will require similar / more labor for a shop to do.

Power/Tq gains from test pipes are substantially more.

Test pipes are fully reversible as long as you keep the stock cats. The secondary cat delete will be more of a permanent mod. This is something to keep in mind if you're worried you won't like the result.

Plus side to secondary cat delete:
Test pipes will throw a CEL without a tune, secondary cat will not.

Secondary cat gutting will look stock underneath.

I get that test pipes are relatively cheap, I was just looking at some other options and what not. I wasn't aware that the hp/torque values would be greater with test pipes compared to gutting the cats so thanks for pointing that out!

mrspecter wrote

I'm probably just only considering primary cat delete. At first I didn't really want to mess with the cats, but with test pipes it'll be inevitable, which means I'll need to get a tune to deal with the CEL and to pass NY state inspection which is a pain in the ass.

My brother has a heavily modified C63 AMG and I cannot deal with the smell that it makes. I cannot drive behind him at all and when I ride inside the car with him, the smell makes it unbearable. The smell is a huge concern for me, which is why I'm a bit hesitant.

We're in the same boat, I don't want to delete both cats for two reasons; 1) it may be too loud, 2) My fiance would never ride in it due to the smell (maybe that's a good thing, she already hates it lol!)

That is kind of the reason why I was considering just a secondary cat delete, since it has the lower value cell the change would be less drastic then a primary cat delete. Decisions, decisions.... Let me know what you end up going with.

mrspecter wrote

It's nice to hear someone is on the same boat. Let me know what you eventually decide to do and post some videos of the sound if you could. By the way, which test pipes are you considering? I know there's quite a few options out there.

I need to do my research. I need something that is California SMOG compliant... I assume that means I need to retain my Cats

The nice thing about my aFe x /MPE setup is that it completely shuts up at light loads and/or on the highway.

Way louder at WOT, bassier at low rpms, but retains that no-drone, "more of the same good sounds as stock" character of the MPE without being annoying on the highway

For what it's worth, the aFe 300cell resonated high-flow cat xpipe does not cause my car to throw a CEL (I have a tune, but not a "stage 2" tune so there's no CEL defeat going on). I've had it on the car for more than a year now.

If you're sensitive to smell, nothing is going to be as good as two 400cell plus 200cell stock setup. Any change is going to add some. It's tolerable on my car with the catted aFe, I would never be able to stand a catless setup either though, it's annoying as shit being behind a catless car and driving one is worse

Richbot wrote

The nice thing about my aFe x /MPE setup is that it completely shuts up at light loads and/or on the highway.

Way louder at WOT, bassier at low rpms, but retains that no-drone, "more of the same good sounds as stock" character of the MPE without being annoying on the highway

For what it's worth, the aFe 300cell resonated high-flow cat xpipe does not cause my car to throw a CEL (I have a tune, but not a "stage 2" tune so there's no CEL defeat going on). I've had it on the car for more than a year now.

If you're sensitive to smell, nothing is going to be as good as two 400cell plus 200cell stock setup. Any change is going to add some. It's tolerable on my car with the catted aFe, I would never be able to stand a catless setup either though, it's annoying as shit being behind a catless car and driving one is worse

Thanks for this post, it taught me a lot without having to research myself!!

Richbot Is this the product you are referring to?

https://www.ecstuning.com/b-afe-parts/exh-25in-rp-bmw-m3-e9x-07-13-v8-40l/49-36321~afe/

Yep. Looks like the price went up.

Richbot wrote

Yep. Looks like the price went up.

Hmm tariffs related?