Question about spacers on OEM wheels

J'ai un 2011 m3 e93 avec les roues de 19 pouces. Quel type d'entretoises puis-je utiliser à l'avant et à l'arrière?

Vous voudrez peut-être être plus précis... Tailles de pneus OEM? Travaux de suspension ? Généralement les gars courent une configuration 12 f / 15 r pour un ajustement agressif agréable.

245/35/19 f 265/35/19 r

Oem suspension

chris s wrote

you may want to be more specific... OEM tire sizes? Suspension work? Generally guys run a 12 f / 15 r setup for a nice aggressive fit.

usually its the other way around. the thicker spacer goes on the front so 15f and 12r is what i ran when i had the e90.

1MOREMOD wrote

usually its the other way around. the thicker spacer goes on the front so 15f and 12r is what i ran when i had the e90.

My apologies...correct. 15/12

chris s wrote

My apologies...correct. 15/12

I always felt vibration on my E90 w/ 15s up front. Hated it. (Had them installed by numerous ppl who said they were just installed wrong.)

dmk08 wrote

I always felt vibration on my E90 w/ 15s up front. Hated it. (Had them installed by numerous ppl who said they were just installed wrong.)

never had that issue but as soon as i started tracking the car and switching wheels i quit using them as its a pain to take off with any speed. sometimes a lot of swearing and sweating to get them off, thats what she said.

miringrains wrote

I have a 2011 m3 e93 with the 19 inch wheels.. What kind of spacers can i run both front and rear?

15F/12R is recommended for most stock setups, assuming you are still on stock Continential or PSS. Pirellis can run a bit wider.

Macht Schnell wheel spacer reference thread
http://www.m3post.com/forums/showthread.php?t=262054

The above linked thread will show tons of examples, including before/after.

Turner spacers are probably the easiest to take off as they have notches to allow them to be pried off rather easily.

DrC

1MOREMOD wrote

usually its the other way around. the thicker spacer goes on the front so 15f and 12r is what i ran when i had the e90.

Yes i'm running 15f 12r Macht Schnell spacers with swift springs

Im running MS 15f/12r on my stock ZCP's with p-zero's. No issues with vibration or anything. Prior to install, i put on some anti-seize to make un-installing easier if I were to take them off.

You might read this too.
http://www.m3post.com/forums/showthread.php?t=336209&referrerid=226103

I run 15/5 with the ZCP set and 15/15 with winter 219 set.

I have Rogue Engineering 15/12

http://www.m3post.com/forums/showthread.php?t=897546

15F/12R is what we normally recommend as well.

I'm running 15f/12r Turner's. No vibration. Yes, the slots do make it a lot easier to remove them. I also use an anti-seize compound as well.

Ditto stock 19inch rims and suspension 15f/12.5r turner spacers, no vibration and no rubbing.

Im about to try 12.5mm turners all around on my zcp wheels. Doing it while i add my kw v3. Hope it works out.