Post Up Pics of Aggressive Offsets

woptang22 · 09-19-2012, 01:06 PM

Quote:

Originally Posted by lonestar22

guys on this page running 10's up front and 12's in the back and you post this! hahahahaha wrong thread bro

but seriously a 9.5 w/ 22offset will fit with absolutely no issues with a 225/35/19 tire in the front. if your running a 9.5 22et in the back. you need to get a wider wheel

The 9.5 inch wheel is the rear with m3 fitment of +22. So thats why I was concerned. Some people get rubbing issues with _+22 in the rear. I ended up going with 265/30/19 rear. And 225/35/19 fronts. The fronts I believe are +35.

Pcemkr · 09-19-2012, 02:16 PM

Quote:

Originally Posted by woptang22

The 9.5 inch wheel is the rear with m3 fitment of +22. So thats why I was concerned. Some people get rubbing issues with _+22 in the rear. I ended up going with 265/30/19 rear. And 225/35/19 fronts. The fronts I believe are +35.

This thread is for aggressive offsets, not typical offsets.

bpsu07 · 09-19-2012, 03:24 PM

I need new pics, but I run a 12 rear (et28) and 10 front (et22) too. Thinking about a more aggressive setup, if I can sell my damn wheels.

VMRWheels · 09-19-2012, 04:56 PM

Frode's awesome touring

Iranman · 09-19-2012, 05:08 PM

Can i play?
18x9.5 -3
18x9.5 -8

Willbleich637 · 09-19-2012, 05:49 PM

Quote:

Originally Posted by Iranman

Can i play?
18x9.5 -3
18x9.5 -8

I love this thing!!!!!!!! Just too low for pa wish I was still in florida or calli :/

VMRWheels · 09-19-2012, 07:12 PM

Quote:

Originally Posted by Willbleich637

I love this thing!!!!!!!! Just too low for pa wish I was still in florida or calli :/

haha, too low for anywhere! Great work btw. Imagine seeing that rolling on the freeway.

project335i · 09-19-2012, 07:23 PM

Quote:

Originally Posted by E90Fatlace

Quote:

Originally Posted by M_Truong

Project335i, E90fatlace, and Frode =

I need to get rid of my TE37SL's and step up my game.

E90fatlace, I've been looking at Work VSXX in a similar size to yours. Did you run into a lot of issues getting them to work?

ummm fronts no. my 10s in the front fit fine super low. my coils almost maxed, if i were to buy camber plates and throw a degree on there i could tuck the whole tire probably..

rears.. yeah. i dont really reccomend going 12.. i ruined my fenders over it. if i could go back i would have done probably 12 with a higher offset and less lip. or not rolled fenders much at all.. i dunno. ima get em remolded and the bumper pulled out so i can run a wider tire. the 285/30 hankook would hit the bumper if i was anywhere near dropped :/ so igotta widen it. imo a 11.5 is perfect. +20ish with a 275 tire.

and ps: i havent touched camber, so im sure i could have made the tire n wheel fit better if i just cambered it. but im past that negative look. i like em sitting flat n fat

Im running 2.2 camber in the rear with the 11.5 rear on a 285/30 and its good. Didn't mess my fenders up I didn't roll i cut the lip right off. On the PRE LCI it would be fine with a 12 with a little higher offset.

woptang22 · 09-19-2012, 07:51 PM

Quote:

Originally Posted by Pcemkr

This thread is for aggressive offsets, not typical offsets.

So +22 is a typical offset? I apologize but I asked this question in another thread and I was told it wouldnt work. So I thought being everyone here has aggressive fitments. Maybe someone could help me out. I apologize for asking a question on a forum.

07335aw · 09-19-2012, 09:35 PM

Quote:

Originally Posted by Mr Singh

Quote:

Originally Posted by project335i

18x10 with 245/35 front
18x11.5 with. 285/30 rear.
Both are low offsets

Are those ccw?
Sick setup
Nice to see some Canadians represent.

bpsu07 · 09-19-2012, 09:36 PM

Quote:

Originally Posted by woptang22

So +22 is a typical offset? I apologize but I asked this question in another thread and I was told it wouldnt work. So I thought being everyone here has aggressive fitments. Maybe someone could help me out. I apologize for asking a question on a forum.

I mean....you are on E90POST, lol. BMW Purists

et+22 will work, also depending on what's the width of your wheel, sometimes you need more or less.

project335i · 09-19-2012, 09:52 PM

Quote:

Originally Posted by 07335aw

Quote:

Originally Posted by Mr Singh

Quote:

Originally Posted by project335i

18x10 with 245/35 front
18x11.5 with. 285/30 rear.
Both are low offsets

Are those ccw?
Sick setup
Nice to see some Canadians represent.

Thanks bro. Come out to one of the local meets we have them every Thursday

woptang22 · 09-20-2012, 05:20 AM

Quote:

Originally Posted by bpsu07

I mean....you are on E90POST, lol. BMW Purists

et+22 will work, also depending on what's the width of your wheel, sometimes you need more or less.

The wheel is 19x9.5 et+22. I know its not what people are running in this thread. But some are telling me it wont work. So I thought Id post in here where guys run crazy offsets and find a bit of help.

Frode D · 09-20-2012, 05:49 AM

Quote:

Originally Posted by woptang22

The wheel is 19x9.5 et+22. I know its not what people are running in this thread. But some are telling me it wont work. So I thought Id post in here where guys run crazy offsets and find a bit of help.

Should be just fine with 235/35 tires. Might get a slight roll if you are lowered alot.

jvsxn · 09-20-2012, 05:54 AM

Quote:

Originally Posted by woptang22

The wheel is 19x9.5 et+22. I know its not what people are running in this thread. But some are telling me it wont work. So I thought Id post in here where guys run crazy offsets and find a bit of help.

My previous setup was 19x8.5/9.5 with 25/22 offset which was wrapped with 235/35 and 245/35 tires (S-Drives). The rears would occasionally rub the lining when I'm smashing but for the most part they're good. Like someone stated before it'll depend on the width of wheels, tire specs and brand not to mention how low your car sits. Some will have firmer sidewalls than others which will affect the ability to stretch.

WiLD · 09-20-2012, 06:01 AM

Wish most of these were attachments so I could actually view them on my work computer

Pcemkr · 09-20-2012, 08:23 AM

Quote:

Originally Posted by woptang22

The wheel is 19x9.5 et+22. I know its not what people are running in this thread. But some are telling me it wont work. So I thought Id post in here where guys run crazy offsets and find a bit of help.

Some have been fine with even a 265 on 9.5" et22. Depends on how low you are, camber, roll, etc. 245-255 should be fine as well.

E90Fatlace · 09-20-2012, 12:00 PM

Quote:

Originally Posted by project335i

Im running 2.2 camber in the rear with the 11.5 rear offset below 20 on a 285/30 and its good. Didn't mess my fenders up I didn't roll i cut the lip right off. On the PRE LCI it would be fine with a 12 with a little higher offset.

trust me. the big difference is 18s and 19s.
i ran 275 n could have ran 285 no problem on my 18 x 11.5

19s is a whole new story to try n fit low. you run bigger tires but your not tucking tire like i used to on my 18s and the way i tuck tire on my 19s

i could camber my setup as well. but i dont want to.

project335i · 09-20-2012, 12:14 PM

Quote:

Originally Posted by E90Fatlace

trust me. the big difference is 18s and 19s.
i ran 275 n could have ran 285 no problem on my 18 x 11.5

19s is a whole new story to try n fit low. you run bigger tires but your not tucking tire like i used to on my 18s and the way i tuck tire on my 19s

i could camber my setup as well. but i dont want to.

Yeah your right when it comes to 18s and 19s. But my rear is just perfect and sitting right no gap between rim/tire and fender.. different strokes for different folks though i'd rather see more poke then tuck

But your 18s didn't poke at all compared to mine

Ghost170 · 09-20-2012, 12:51 PM

Dumped!

sk8board511 · 09-20-2012, 03:06 PM

IRANMAN where did you get/ what did you do to those headlights, they look like halogens, just pitch black...damn good looking

jlo834 · 09-20-2012, 11:31 PM

you guys with +25 and under offset have sick setups! My rear wheels are +32 on 265/30 19x10 and I tried throwing 15mm spacers on there today and I got rubbing on the tires.

Other than rolling the fenders, do I need to put a camber kit on as well or will pinching the fender be good enough? I'm afraid of the lip of the rim hitting the fender as well.

Sorry, I know this is a photo thread but I want to ask the pros.

09-19-2012, 03:24 PM	#289
bpsu07 Major 49 Rep 1,007 Posts Drives: E90 Join Date: Sep 2010 Location: DFW TX iTrader: (3)	I need new pics, but I run a 12 rear (et28) and 10 front (et22) too. Thinking about a more aggressive setup, if I can sell my damn wheels. __________________
	Appreciate 0 Quote

09-19-2012, 04:56 PM	#290
VMRWheels BimmerPost Supporting Vendor 2214 Rep 26,001 Posts Drives: BMW Join Date: Jun 2007 Location: Anaheim, CA iTrader: (4) Garage List 2013 BMW M3 [10.00] 2015 BMW M4 [0.00] 2013 BMW F30 [0.00] 2014 BMW F22 [0.00] 2013 BMW F06 [0.00]	Frode's awesome touring __________________ VMR\|Wheels \| 714.442.7916 \| sales@velocitymotoring.com \| www.velocitymotoring.com \| facebook \| flickr \| Instagram
	Appreciate 0 Quote

09-19-2012, 05:08 PM	#291
Iranman First Lieutenant 67 Rep 304 Posts Drives: E90 335i Join Date: Oct 2011 Location: United States iTrader: (0)	Can i play? 18x9.5 -3 18x9.5 -8 __________________
	Appreciate 0 Quote

09-20-2012, 06:01 AM	#302
WiLD Lieutenant 26 Rep 470 Posts Drives: your girl WiLD Join Date: Aug 2012 Location: Chucktown iTrader: (4)	Wish most of these were attachments so I could actually view them on my work computer __________________ \ 07' e92 335i / BSM** \ Saddle Brown / Remus \ JB4 / OSS \ LCI / M3 Rep \ 20" Vossen CV3 / H&R Sport \ QI45 /**
	Appreciate 0 Quote

09-20-2012, 12:51 PM	#306
Ghost170 Brigadier General 89 Rep 3,355 Posts Drives: VIP Sport 335! Join Date: Aug 2007 Location: N CA iTrader: (8) Garage List 2007 BMW e92 335! [6.34]	Dumped! __________________ *07 E92 335!* AA AE GP HR LC M3 KW BMS BMW LUX CYBA STRI WORK HELIX MTECH LSWEEE(Wavetrac)!
	Appreciate 0 Quote

09-20-2012, 03:06 PM	#307
sk8board511 Captain 62 Rep 689 Posts Drives: 07 E90-Bikes on bikes on bikes Join Date: Feb 2010 Location: Charlotte NC iTrader: (0)	IRANMAN where did you get/ what did you do to those headlights, they look like halogens, just pitch black...damn good looking __________________ KING"ish" OF Changed for collins
	Appreciate 0 Quote

09-20-2012, 11:31 PM	#308
jlo834 bleeds purple and gold 22 Rep 165 Posts Drives: 325i Join Date: Sep 2006 Location: The I.E. iTrader: (3)	you guys with +25 and under offset have sick setups! My rear wheels are +32 on 265/30 19x10 and I tried throwing 15mm spacers on there today and I got rubbing on the tires. Other than rolling the fenders, do I need to put a camber kit on as well or will pinching the fender be good enough? I'm afraid of the lip of the rim hitting the fender as well. Sorry, I know this is a photo thread but I want to ask the pros.
	Appreciate 0 Quote