ItsGary wroteMap update?Got a full tank of gas. Haven't really been into the car much so I didn't renew my insurance yet. Its parked in the car with the CTEK connected.
Also - Sent everyone the email for the map update.
7,3 MVIEWS
24 kREPLIES
39 kAPPRECIATES
15 hr agoLAST POST
Freiheit wrote2019-1 Map Update for CIC carsItsGary wroteMap update?Got a full tank of gas. Haven't really been into the car much so I didn't renew my insurance yet. Its parked in the car with the CTEK connected.
Also - Sent everyone the email for the map update.
Took her for a nighttime cruise along Ocean Parkway. 68 degrees, windows down, sunroof open, cool breeze coming off the ocean. Life is good sometimes.
Lowered it.
Bartledoo wroteThat's a real slick view!Moar tires
I bought a Challenge rear section off of a forum member (thanks, M3R1) and installed it yesterday. Sounds like a totally different car versus the MPE I had on it before. Perfect fit with the OG Challenge Race x pipe too.
Washed it and did my usual Bead Maker treatment then took a cruise to Costco to fill up with gas today.
Washed it and did my usual Bead Maker treatment then took a cruise to Costco to fill up with gas today.
I changed the fuel tank breather valve and put in new spark plugs. It took 3 hours, but I am a novice. I found it to be pretty straight forward using the diy... https://www.m3post.com/forums/showthread.php?t=1273927
I used the "wire pull method" for the spark plugs, and it really went pretty quickly. Cylinders 4 and 8 were tight, but doable. Removing the fuel tank breather valve was definitely a pain in the ass.
Then I went for a drive.
My idle is definitely smoother, and pulling all the way to redline still puts a smile on my face.
I used the "wire pull method" for the spark plugs, and it really went pretty quickly. Cylinders 4 and 8 were tight, but doable. Removing the fuel tank breather valve was definitely a pain in the ass.
Then I went for a drive.
My idle is definitely smoother, and pulling all the way to redline still puts a smile on my face.
MBimmer2011 wroteThat's a real slick view!
Washed it - then it rained.
Stopped raining so I waxed it - then it rained again...
But I will need to go out and buy fuel (surprised?) later so hope the rain screws off soonish...
And the rain may have gone away for a bit.
Stopped raining so I waxed it - then it rained again...
But I will need to go out and buy fuel (surprised?) later so hope the rain screws off soonish...
And the rain may have gone away for a bit.
Tried out swissvax for the first time.
Not insanely impressed, but it's not bad.
Cleaning interior is definetly not as enjoyable as washing the exterior of my car. Had to use loads of elbow grease...
Not insanely impressed, but it's not bad.
Cleaning interior is definetly not as enjoyable as washing the exterior of my car. Had to use loads of elbow grease...
Siajoon wroteI love the seats!Tried out swissvax for the first time.
Not insanely impressed, but it's not bad.
Cleaning interior is definetly not as enjoyable as washing the exterior of my car. Had to use loads of elbow grease...
Nilick wroteThis looks fantastic along with the wheels!Lowered it.
I got to do another one of these...AGAIN! Maybe third time IS the charm
On another not I noticed that those fake screws on the plenum go all the way thru so idk
On another not I noticed that those fake screws on the plenum go all the way thru so idk
EJT86 wroteHave you been using rebuilt TAs as your replacements?I got to do another one of these...AGAIN! Maybe third time IS the charm
On another not I noticed that those fake screws on the plenum go all the way thru so idk
SoCalRPM wroteNo I should have clarified this is my first from Mpower motorsports. Last time I did them was about 4 years ago so before rebuilding was even an option.Have you been using rebuilt TAs as your replacements?
Foam washed and softened Öhlins to 14 clicks out from 10 clicks out. Should be able to further monitor rear rub with the softer setting. Also removed the mold release nibs from all 4 tires. Now I won’t know how close to the curb I am.
Very happy with the cheap Amazon foam lance.
Very happy with the cheap Amazon foam lance.
wyatth wroteThat last one is just BONKERSGawd I miss BC.
Want to go halfies on one of these? You could have checked them out with a slight detour.
https://www.redfin.ca/bc/capital-regional-district/north-saanich/1580-Lands-End-Rd-V8L-5L5/home/157166840
https://www.redfin.ca/bc/capital-regional-district/north-saanich/1630-Lands-End-Rd-V8L-5L5/home/157233732
https://www.redfin.ca/bc/capital-regional-district/north-saanich/9700-Glenelg-Ave-V8L-5H4/home/157263275
https://www.redfin.ca/bc/capital-regional-district/5179-E-Sooke-Rd-V9Z-1B8/home/160716574
I found my car's speed today. Making the run from DC to Norfolk down I-95, traffic finally cleared and I found a comfortable speed and set the cruise control; and there it was. The car settled in and everything fell into that state of harmonic resonance. The engine was purring, barely putting forth any effort. The suspension seemed to glide over the pavement merely undulating over rises and valleys in the road. The car tracking into curves in the road with barely a urge of the steering wheel. The noise seemed to quiet a few decibels. Windows down with some Zeppelin playing on iPod, I managed to glide for at least 8 miles without touching the brakes seeing the holes in traffic appear as if they were in harmony with the car.
Then the whole illusion was shattered by those God forsaken Northern Virginia drivers
Then the whole illusion was shattered by those God forsaken Northern Virginia drivers
ItsGary wroteMan you always just happen to be in the right place at the right time with this stuff. You're like the Forrest Gump of BMW software.I can email you the links and stuff you need for free. Not worth paying $20 when you can readily find it by simply searching lol
+1 on props to Gary! Thanks again.
fatalelement wroteAlameda?She hit 100k today, so I cleaned her up and did a photoshoot at the old Alameda Naval Air Station
Isn't that where they keep the nuclear wessels?




