M3 GTS -- does it have dust shields, brake sensors?

I am about to install the brembo 380 x 34 6 pot front and 380 x 28 4 pot rear brakes on my 2011 e92 m3. I have seen people talk about tying back the brake sensors and trimming or removing the dust shields.

Does anyone know if the stock M3 GTS has dust shields and brake sensors? If so, I wonder which pads the GTS uses. The GTS basically uses the same brake set up I am installing. I wonder if I could get the dust shields from the GTS to install on my car if it has them.

Also can someone clarify if there are pads for the brembo's that use the oem brake sensor for street use? I have read that the Feroda FS2500s allow it but I have read conflicting info.

Finally, I have read most people trim their dust shields but I can not find specifics on where and how they exactly trimmed the shields for the 380 kit.

Thanks for your help. I have used the search function but can't seem to find a definitive answer on these questions.

I am in the same boat. My brakes should be arriving this Friday. Will try to install it Sunday night or Monday morning. I'll try to take some pictures of the dust shield trim. No guarantee that I do it properly, but I'll post pictures anyways. Unless someone who've done it can post pictures.

checkcaptain would know, but I don't think he has PM ability here.

.

See my build here. I have Brembo GT 380mm at all four corners.

I have a pic or two of what my front shields look like. I trimmed mine with a dremel. The trimming is just required to allow for the larger calipers.

http://www.m3post.com/forums/showthread.php?t=830853

I trimmed my front shields in order to have some heat protection between the rotor and the steering bushings.

For the rears you have to cut the whole shield off. You cannot remove it without completely dismantling the hub assembly.

I used EuroTuners tech article as a reference. However, they completely removed their front shields.

http://www.eurotuner.com/techarticles/eurp_1011_2011_bmw_e90_m3_project_car/viewall.html

Hope this helps

aus wrote

checkcaptain would know, but I don't think he has PM ability here.

.

GTS does have different shields in the rear with different part #.

Checkcaptain wrote

GTS does have different shields in the rear with different part #.

What about the fronts?