I am unable to get the exhaust out.. it think the reinforcement bars is really blocking it, anyone remove their oem exhaust from a e93 without removing their reinforcement bars?
2.7KVIEWS
6REPLIES
0APPRECIATES
03-24-2015LAST POST
When I removed my exhaust on my E92 to do the Oem. exhaust mod. I used WD-40 .
After it was a piece of cake...
After it was a piece of cake...
Hey I had the same problem when I did my exhaust. I had to get a torque wrench to remove the center bolt of the reforcement bar.
so.. finally I remove the center bolt 18mm of the reinforcement bar and the two 13mm bolt on the left and right side of the bars. I should of done this on the 1st place.
///M Power-Belgium wrotehaha if I was working on a E92 I'll be done in 40 min max. The E93 have a lot of reinforcement bars under the car, making it much harder to remove the exhaust.When I removed my exhaust on my E92 to do the Oem. exhaust mod. I used WD-40 .
After it was a piece of cake...
M3GarageKing wroteIndeed , and you are right !haha if I was working on a E92 I'll be done in 40 min max. The E93 have a lot of reinforcement bars under the car, making it much harder to remove the exhaust.