RDC Module in 2008

Hey, guys...

So, I had TPMS coded out last night, but still need to undo the RDC module. I was under the impression that the attached picture is the module (white connector), but I'm still getting a TPMS warning come up after unplugging it.

Does the whole unit need to be removed from the vehicle as opposed to just being unplugged?

Thanks!





Sike! I found it. My trunk is kinda complicated to work on with the air ride stuff in there, so I didn't pull back the carpeting enough to see the RDC.

Delete at will, moderators!

Did you following all the coding in this thread?

https://www.m3post.com/forums/showthread.php?t=1487472&highlight=FTM+coding


If you don't do everything you will still get errors.

tdott wrote

Did you following all the coding in this thread?

https://www.m3post.com/forums/showthread.php?t=1487472&highlight=FTM+coding


If you don't do everything you will still get errors.

Had it done by BPM sport, so I know it's all good. I think I may just have the wrong plug unplugged.