EOI: Brembo BBK Calipers for E9X M3 or 1M

Hey guys I've been following this thread with interest for a while now..

http://www.m3post.com/forums/showthread.php?t=632273&page=22

https://www.akmotorsport.net/product-category/bmw/e-90-e92-e93-m3/

Basically Albert reconditions the calipers and paints them in a colour of your choice and ships them with the required custom mounts all ready to bolt on and utilises the oem ///M rotor.









(Note: aftermarket slotted stoptech rotors above)





Albert will offer a 10% discount for 4 buyers:

1. Payment would have to be made by bank wire transfer.
2. Payment has to be made with in a week time from all the buyers, so we would consider this a GB.
3. I can offer 10% discount on the order of 4 kits:

Full front kit
https://www.akmotorsport.net/shop/all-parts/brakes/big-brake-kits/bmw-m3-e90e92e93-big-brake-kit-for-360-mm-oem-disc-full-kit/

$1,798.60 usd

Full rear kit

https://www.akmotorsport.net/shop/all-parts/brakes/big-brake-kits/bmw-m3-e92-rear-big-brake-kit-for-350-mm-oem-disc-full-kit/

$1,195.08 usd

Total inc GB discount is 2694 usd + 195 usd shipping

The people that don't want the brake lines front and rear can deduct 120 usd from the price of the kit.

4. Offer is valid for next 14 days.

Compatiable pads for this BBK:

Front Pads - 2011 Audi R8

Pad Name Part Number Price (USD)
ECS

Hawk Performance HPS 5.0 HB609B.572 HB609B.572 $290.63 https://www.ecstuning.com/b-hawk-par...hb609b.572~hk/

Ferodo DS2500 FCP1664H (two sets are needed) FCP1664H $268.64 https://www.akmotorsport.net/shop/al...fcp1664h-pads/

Ferodo Premier FDB4165 (two sets are needed) FDB4165 UK Stores
Hawk Performance HP Plus HB609N.572 HB609N.572 $338.01 https://www.ecstuning.com/b-hawk-par...et/hb609n.572/

Hawk Performance HPS HB609F.572 HB609F.572 $270.41 https://www.ecstuning.com/b-hawk-par...set/hb609f.572

Hawk Performance PC HB609Z.572 HB609Z.572 $287.94 https://www.ecstuning.com/b-hawk-par...et/hb609z.572/

TRW GDB1507 GDB1507 UK Stores
TEXTAR 2375101 (two sets are needed) 2375101 UK Stores
BOSCH 0 986 494 216 0 986 494 216 UK Stores

Stoptech 309.10290 309.1029 $184.24 https://www.amazon.ca/StopTech-309-1.../dp/B004HEIAR0

Carbontech CT1029-XP20 $357.00

FERODO DS1.11 FCP1664W FCP1664W $409.72 http://speedfreaksusa.com/i-17775019...ini-front.html

Hawk DTC-60 HB609G.572 HB609G.572


Rear Pads - 2011 Porsche 911 Carrera 4S


Pad Name Part Number Price (USD)
ECS
Stoptech 309.11350 309.1135 $199.83 https://www.amazon.ca/StopTech-309-1.../dp/B003K2GLBM

Hawk HPS 5.0 HB664B.634 HB664B.634 $200.43 https://www.ecstuning.com/b-hawk-par...hb664b.634~hk/

HAWK HPS HB664F.634 HB664F.634 $180.57 https://www.ecstuning.com/b-hawk-par...et/hb664f.634/

HAWK DTC-60 HB664G.634 HB664G.634

front

Ferodo Racing FCP1664
DS2500
DS1.11
http://ecat.ferodoracing.com/index.p...e-pads/FCP1664

Pagid Shape No. 2931
http://www.pagidracing.com/product-s...hape-2931.html

Performance Friction
shape number: 7856
http://pfc.parts/product/7856/
7856.08.16.44
7856.11.16.44
7856.38.16.44
7856.97.16.44
7856.01.16.44

rear pads - minor modification to fit the pad

Pagid Shape No. 2405
http://www.pagidracing.com/product-s...hape-2405.html

Ferodo Racing pads
DS2500
DS1.11
http://ecat.ferodoracing.com/car-rac...e-pads/FRP3051

Performance Friction
shape number: 0776
0776.08.17.44
0776.11.17.44
http://pfc.parts/product/0776/

Sorry, as a newb with this, what are our stock brakes like in comparison (assuming we only did a caliper upgrade, with stock discs).

Are those prices AUD or USD?

The link's dont work at the bottom of your post ?

Thanks mate, I may be interested as I am due for brakes soon anyway.

XIX wrote

Sorry, as a newb with this, what are our stock brakes like in comparison (assuming we only did a caliper upgrade, with stock discs).

Are those prices AUD or USD?

The link's dont work at the bottom of your post ?

Thanks mate, I may be interested as I am due for brakes soon anyway.

Ahh my apologies they were the links Albert had sent me, if you click on the link at the top of the page that shall work!

The E9X M3 was largely criticised for its inadequate brakes.

On the oem E9X ///M setup up front there are large big bore single piston calipers and on the rear.

The brembos feature 8 pots up front and 4 pots on the rear which offer improved brake feel and modulation and increased stopping power *

IMO the E9X rotor heat capacity (rotor size) is plenty big enough just the calipers need upgrading. (for a full monty racecar sure bigger rotors would be benficial on a street car keeping weight down and minimising unsprung mass is beneficial warranting the larger rotor heat capacity as just dead weight)

A brembo BBK and rotors is like $10.5-11k AUD delivered. By utilising the oem rotors upgrading to brembo calipers is a huge saving!

Front Brembo BBK 6 piston calipers 380mm rotors:

https://www.turnermotorsport.com/p-338306-brembo-380-front-big-brake-kit-for-e90e92-m3-6-piston-calipers/?pdk=AgE

$4411 USD

Rear brembo BBK 4 piston calipers

https://www.turnermotorsport.com/p-338343-brembo-380-rear-big-brake-kit-for-e90e92-m3/

$3643 USD

Some cheaper BBK's have caliper flex due to their multipiece design whereas the single piece monobloc design of the brembos have less flex and light weight:

multipiece BBK caliper:

Sorry, so are the prices AUD or USD ?

If you click the link and hit USD, its the price shown on the post so my guess it's the USD price, unless as a group buy we're hoping to get like a 30% discount.....

XIX wrote

Sorry, so are the prices AUD or USD ?

Oops usd

Valid for either front or rear only? I only need rear.

do you know if these fit 18 inch wheels?

phillay wrote

do you know if these fit 18 inch wheels?

I trawled the post and guys were saying they had them on their 18" ARC's.
This is the wheel I use to track so this could be an option....

phillay wrote

do you know if these fit 18 inch wheels?

I do recall them fitting oem and apex 18's

M43S7RO wrote

Valid for either front or rear only? I only need rear.

Should be we'll see if we get the numbers! (I have this listed elsewhere also)

DR-JEKL wrote

Should be we'll see if we get the numbers! (I have this listed elsewhere also)

Shane, The guy who asked this question is from the US!!

JJH wrote

Shane, The guy who asked this question is from the US!!

Hey Jon!

Thanks for the heads up, I had noticed that but figured that it wont matter as each kit will be getting shipped separately from akmotorsport

One Aussie member also mentioned that these calipers are approx 1KG lighter per corner in comparison to the oem calipers which is pretty cool

DR-JEKL wrote

Hey Jon!

Thanks for the heads up, I had noticed that but figured that it wont matter as each kit will be getting shipped separately from akmotorsport

All good ..... just thought you wouldn't be too impressed with having to ship to the US if you were personally receiving the whole shipment!!

Good luck with it - pity, it seems like a couple of local guys have bought these independently and could have benefited from this deal