7.3MVIEWS
24KREPLIES
39KAPPRECIATES
YesterdayLAST POST
By the way, it looks like the front brake disc is mounted backwards, by the drills directions.[/QUOTE]

Agree, they are backwards
jvictormp wrote
Nice job!!!

Would like to see the car after all done.

By the way, it looks like the front brake disc is mounted backwards, by the drills directions.
Johnny E92 wrote
Agree, they are backwards
It seems weird but there are some brake rotors where the vanes aren't parallel to the drill holes, so it's possible they are on correctly. Worth double checking though.
Installed the Pom Gts 1 lip
Attached image
_paolo wrote
Installed the Pom Gts 1 lip
More pics of the vette peez. Is that an RS Futures wang?
Bartledoo wrote
_paolo wrote
Installed the Pom Gts 1 lip
More pics of the vette peez. Is that an RS Futures wang?
It's my buddy's C7 Grand Sport and yup RS future wing. Here's the only other pic I have of it. 🤙
Attached image
Started some maintenance and mod work.

First up oil change, then brake fluid flush to rbf600, then some mods!!! Should be a fun few weeks of getting this stuff done in between work and life lol.
Attached imageAttached imageAttached imageAttached image
wyatth wrote
Looks like the 3 of us tried to enjoy 3 different roads yesterday. I went up Mt. Diablo, but Berryessa and Bear Creek are local favorites as well. Yesterday certainly had tough conditions with wet spots for me too, plus more cyclists than I could have imagined. Not the best drive, but it was pretty out.
Haha, I got the Bear Creek idea from your recommendation in the Bay Area driving roads thread, going to try and coordiate something with Davisca455's user avatarDavisca455 if you're interested.
94jedi wrote
Started some maintenance and mod work.

First up oil change, then brake fluid flush to rbf600, then some mods!!! Should be a fun few weeks of getting this stuff done in between work and life lol.
Nice job!

How did you do the flush? Via INPA?
dsenechal wrote
Bought another M3... This marks my 10th m3 so far.
10th M3?

do you have commitment issues?
slcook54 wrote
Haha, I got the Bear Creek idea from your recommendation in the Bay Area driving roads thread, going to try and coordiate something with Davisca455's user avatarDavisca455 if you're interested.
Hey guys I live in Sacramento and would like to join! I got one more buddy with an:party0030: e92 m3 as well that would like to ride out. thanks!
gillara wrote
slcook54 wrote
Haha, I got the Bear Creek idea from your recommendation in the Bay Area driving roads thread, going to try and coordiate something with Davisca455's user avatarDavisca455 if you're interested.
Hey guys I live in Sacramento and would like to join! I got one more buddy with an:party0030: e92 m3 as well that would like to ride out. thanks!
Don't own a m3.. but can I join? Lol
Hello all,
I picked up a 2011 E90 last month and I am experiencing a power steering leak and I was backing in to a spot and as I was turning hard and the steering started to get stiff. I put it up on jacks yesterday to see if a line had popped off to cause a massive leak. However I did not see anything detached. How could I determine if the pump has failed?
alpine_e90m3 wrote
Hello all,
I picked up a 2011 E90 last month and I am experiencing a power steering leak and I was backing in to a spot and as I was turning hard and the steering started to get stiff. I put it up on jacks yesterday to see if a line had popped off to cause a massive leak. However I did not see anything detached. How could I determine if the pump has failed?
If you had a leak, do you see an obvious point of leaking in the steering rack?

Jack up the front of the car, put some more fluid in if you need to and have someone sit inside and turn the wheels lock to lock. Look to see if you can spot the leak that way.

If the pump failed you should see fluid near it. It's possible that a seal on the rack itself failed or it's not worth trying to DIY, you may just need to visit a mechanic.
jvictormp wrote


By the way, it looks like the front brake disc is mounted backwards, by the drills directions.
Thanks for pointing that out! I bought it at Carmax in July. I'm guessing they've been on backwards since then. I'll swap them out this morning.
CamasM3e93 wrote
Thanks for pointing that out! I bought it at Carmax in July. I'm guessing they've been on backwards since then. I'll swap them out this morning.
Make sure you check the vane orientation first. Don't go by the drill holes.
Bartledoo wrote
Make sure you check the vane orientation first. Don't go by the drill holes.
My car's got the rear discs of the M3 E46. I only figured it out because the wrong drills direction made me look.

When I checked, they're not only from other car, but also their part number points to opposite sides.
Received some new shoes. Going to try the Firestone Indy 500s as they're priced right. They seem stiff, and a little heavy, but I have heard good things.

Here is hoping these ones are round... at least their date code is pretty recent, unlike the continental disaster of 2020 I just endured (the new conti tires were made before my worn out PS4S tires...).

🥺
Attached image
Finally installed one of the spgXL's. Easy peasy. Brey Krause ftw
Attached imageAttached image
Hi everyone, new M3 owner so excuse my ignorance, what is the perforated metal plate under the seat?

And thanks In advance, great forum, lots of interesting info from some very knowledgeable people, much appreciated
Johnny E92 wrote
Hi everyone, new M3 owner so excuse my ignorance, what is the perforated metal plate under the seat?

And thanks In advance, great forum, lots of interesting info from some very knowledgeable people, much appreciated
It covers the subwoofer. One on each side.
Johnny E92 wrote
Hi everyone, new M3 owner so excuse my ignorance, what is the perforated metal plate under the seat?

And thanks In advance, great forum, lots of interesting info from some very knowledgeable people, much appreciated
Welcome onboard! The fender looked good in the one picture posted, one or two more to complete your intro mate?
Ordered ACL & ARP bolts, along with SZL clockspring for M-Drive Retrofit & GTS MDM coding. Parts are starting to stack up for Spring.