_X wroteI have a Audison AP F8.9BIT FORZA. It comes with its own software. I think its called bit one or bit drive. It sounds like the artist and band are on the dash!What software are you using?
7.3MVIEWS
24KREPLIES
39KAPPRECIATES
YesterdayLAST POST
Pulled the window tint off the car, can't believe I have been putting that off for so long. It comes off easy once you get it going. Then went for a rip..
SAMM3Y wrotewhat wing is that?Pulled the window tint off the car, can't believe I have been putting that off for so long. It comes off easy once you get it going. Then went for a rip..
irokwrx wroteIt's an APR mustang drag wing, I don't love it, the foil is nice but the mounts are kind of awful. I like that it's a lower setup with an aggressive angle that's adjustable and I thought it looked good on the mustang. I need to figure out some different mounts for it though.SAMM3Y wrotewhat wing is that?Pulled the window tint off the car, can't believe I have been putting that off for so long. It comes off easy once you get it going. Then went for a rip..
Removed the sticky and refinished my rear console cubby surround and cup holders. Going to remove my seat backs next to refinish the sticky plastic centers.
Touched up the powder coat on the wheels a little from the curb rash the PO did. Just used some gloss black touch up paint.
Still trying to figure out what lip and wheels to put on. Debating between GTS and GT4. And ARC-8 or FL-5. Kinda thinking the 18x9.5 et 28 FL-5 in the front with a 5mm spacer and 18x10.5 et 22 in the rear. I really dig the shallow lip in front and a little deeper for the back. But the square 18x10 ARC-8 is hard to beat.
Still trying to figure out what lip and wheels to put on. Debating between GTS and GT4. And ARC-8 or FL-5. Kinda thinking the 18x9.5 et 28 FL-5 in the front with a 5mm spacer and 18x10.5 et 22 in the rear. I really dig the shallow lip in front and a little deeper for the back. But the square 18x10 ARC-8 is hard to beat.
ToddinTN wroteGreat work my friend!Removed the sticky and refinished my rear console cubby surround and cup holders. Going to remove my seat backs next to refinish the sticky plastic centers.
Epoustouflant wrotedear Matt
you're an animal
ToddinTN wroteWow, that looks incredible. Great job!Removed the sticky and refinished my rear console cubby surround and cup holders. Going to remove my seat backs next to refinish the sticky plastic centers.
New euro bumper came in. Now just need to find some time to install it.
MechEngineer408 wroteNew euro bumper came in. Now just need to find some time to install it.
If you don't mind me asking. what did you pay and where? Thanks again.
irokwrx wrote$900 from aeuroplugIf you don't mind me asking. what did you pay and where? Thanks again.
ToddinTN wroteI literally have a browser tab open with a replacement cup holder just waiting to be bought due to scratches... this is like some serious voodoo magic! How?!Removed the sticky and refinished my rear console cubby surround and cup holders. Going to remove my seat backs next to refinish the sticky plastic centers.
MechEngineer408 wroteDid they ship it painted?irokwrx wrote$900 from aeuroplugIf you don't mind me asking. what did you pay and where? Thanks again.
DRLane wroteYep, painted in house.Did they ship it painted?
MechEngineer408 wroteThat's a killer deal! Enjoy that. Install is super simple.DRLane wroteYep, painted in house.Did they ship it painted?
M3Post 1 - Year Long Rattle 0
InnerBlueSkies wroteMan I have an annoying rattle somewhere in the back on the highway. Sounds like it's coming from inside the trunk area, but who knows. Noises bounce around cars.M3Post 1 - Year Long Rattle 0
CTMike wroteI was going the same route and thought- well, I can try to refinish it and if I screw it up I can just buy another. Just use the stuff I show and it’s really easy. Hardest part is disassembly.I literally have a browser tab open with a replacement cup holder just waiting to be bought due to scratches... this is like some serious voodoo magic! How?!
Tips- if you use the citristrip, get the aerosol. Don’t use the gel. Spray it on, give it 5 to 10 minutes and the coating wipes right off. Do the work in a well ventilated area. Rinse the parts, let dry. Spray the adhesion promoter, wait 10 minutes. Hit the part with 2 to 3 light coats 10 to 20 min apart. I used a heat gun on the lowest setting to preheat the parts slightly to help with adhesion and then lightly to help dry. I may experiment with a matte clear if I do it again to help prevent future scratches but given how quick and easy it is, and the materials left over, a respray would be a quick repair especially since i won’t need to strip the sticky off again.
ToddinTN wroteIs the coating similar to the soft-touch OEM?I was going the same route and thought- well, I can try to refinish it and if I screw it up I can just buy another. Just use the stuff I show and it’s really easy. Hardest part is disassembly.
Tips- if you use the citristrip, get the aerosol. Don’t use the gel. Spray it on, give it 5 to 10 minutes and the coating wipes right off. Do the work in a well ventilated area. Rinse the parts, let dry. Spray the adhesion promoter, wait 10 minutes. Hit the part with 2 to 3 light coats 10 to 20 min apart. I used a heat gun on the lowest setting to preheat the parts slightly to help with adhesion and then lightly to help dry. I may experiment with a matte clear if I do it again to help prevent future scratches but given how quick and easy it is, and the materials left over, a respray would be a quick repair especially since i won’t need to strip the sticky off again.
Ccieszyn wroteSimilar in appearance but not soft touch. It is a paint specifically formulated for plastic and vinyl.Is the coating similar to the soft-touch OEM?
