aus wroteYes, by quite some margin. The details are on the website.
Are the Black one's stiffer??
.
113.5KVIEWS
59REPLIES
6APPRECIATES
05-16-2024LAST POST
bump
I've KW clubsport 2 way installed and the car still roll.. so my plan so far is to have RD sport SB, TMS solid subframe and diff bushings, TMS solid engine and transmission mounts.. is there any recommendations or of feedback about this products.. and keep in mind I'm using my car on track only no more DD..
Radiation Joe wroteOld post but any details on what this 80 MPH shake is referring to?I have the Dinan monoballs in front and had them on my last e90.... haven't tracked with the monoballs, yet, but I expect better steering response while under braking.
Another advantage is the elimination of the dreaded 80mph shake from the front end. My first car didn't have any problem with shake, but the second car had it. My 18 inch RACs made it worse with the necessary spacers. The monoballs eliminated it.
E90 M3 6-MT
ymmv
Solid aluminum subframe bushings
Solid aluminum differential bushings
challenge race test pipes
AA signature exhaust
There is a lot of feedback on NVH and this is what I have to add. It is impossible to talk to people in the back seat over 40mph. Two reasons I am getting rid of the solid diff mounts after living with it for prob 4-years.
1) Conversation is impossible with back seat passengers over the whine
2) I used to tape a mic in the trunk to my gopro for track days vid and exhaust sounds. It sounded so good. If I put a mic in the trunk now - even at street speeds you cannot hear a test pipe exhaust over the whine as much as you should. That is a lot of NVH right there. Forget about picking up the exhaust sounds over the whine at track speed.
In my case - this is the experience. I have been upgrading my cars for years and I can truly say this was the only mod I ever regretted and fully hate. It sucks not being able to talk to your kids in the back seat. Tolerance? test pipes and track pads full time - street / track. So I know loud and neither bother me at all. But not being able to talk to people in your car is on another level.
Also a Mercedes master mechanic with a AMG 63 down the street that we have been to the track together was walking his dog. Next time I see him he asked my if I went to straight cut gears or something. It is so loud at 20mph people 60 feet away hear it loud enough to ask questions.
I know this is not everyone's exp - but wanted to share mine - that statistically, this could also happen to some other e9x owners as well.
ymmv
Solid aluminum subframe bushings
Solid aluminum differential bushings
challenge race test pipes
AA signature exhaust
There is a lot of feedback on NVH and this is what I have to add. It is impossible to talk to people in the back seat over 40mph. Two reasons I am getting rid of the solid diff mounts after living with it for prob 4-years.
1) Conversation is impossible with back seat passengers over the whine
2) I used to tape a mic in the trunk to my gopro for track days vid and exhaust sounds. It sounded so good. If I put a mic in the trunk now - even at street speeds you cannot hear a test pipe exhaust over the whine as much as you should. That is a lot of NVH right there. Forget about picking up the exhaust sounds over the whine at track speed.
In my case - this is the experience. I have been upgrading my cars for years and I can truly say this was the only mod I ever regretted and fully hate. It sucks not being able to talk to your kids in the back seat. Tolerance? test pipes and track pads full time - street / track. So I know loud and neither bother me at all. But not being able to talk to people in your car is on another level.
Also a Mercedes master mechanic with a AMG 63 down the street that we have been to the track together was walking his dog. Next time I see him he asked my if I went to straight cut gears or something. It is so loud at 20mph people 60 feet away hear it loud enough to ask questions.
I know this is not everyone's exp - but wanted to share mine - that statistically, this could also happen to some other e9x owners as well.
Hi Everyone,
I'm having a difficult time trying to source some sort of monoball/spherical replacement for the rubber bushing in the front control arm (not the tension strut).
The only thing I can find is a replacement for the entire arm (SPL).
Is there such a thing, or am I forced to replace the arm with an SPL type unit.
Thank you,
Steve
I'm having a difficult time trying to source some sort of monoball/spherical replacement for the rubber bushing in the front control arm (not the tension strut).
The only thing I can find is a replacement for the entire arm (SPL).
Is there such a thing, or am I forced to replace the arm with an SPL type unit.
Thank you,
Steve
sperkins wrotehttps://germanautosolutions.com/gas-store/bmw-e90-products/Hi Everyone,
I'm having a difficult time trying to source some sort of monoball/spherical replacement for the rubber bushing in the front control arm (not the tension strut).
The only thing I can find is a replacement for the entire arm (SPL).
Is there such a thing, or am I forced to replace the arm with an SPL type unit.
Thank you,
Steve
derbo wroteThanks, but that's the tension strut. i'm looking for the other 'front' arm.
sperkins wrotehttps://www.hardrace.com/Product_detail.asp?id=2369&Car_Make=2&Car_model=5&Car_Type=8&MainType=Thanks, but that's the tension strut. i'm looking for the other 'front' arm.
ornicar wroteClose but not quite. The description says “not for M car”
sperkins wroteThe description is Not correct. They sell a version with the monoball ever fited in the arm. I advise you to choose it because the press fit in the arm is difficult and you can destroy the monoball.Close but not quite. The description says “not for M car”
sperkins wroteI'm a little confused cause the other front wishbone is all spherical. That's probably why you can't find one.Thanks, but that's the tension strut. i'm looking for the other 'front' arm.
You can see the spherical joint and the balljoint on the other side.
derbo wroteMaybe i'm confused. What i'm looking at appears to be a mushy rubber unit.I'm a little confused cause the other front wishbone is all spherical. That's probably why you can't find one.
You can see the spherical joint and the balljoint on the other side.
sperkins wroteIt’s a sealed bearing like the one used by BW in the LCAB:Maybe i'm confused. What i'm looking at appears to be a mushy rubber unit.
https://www.bimmerworld.com/BimmerWorld-Precision-Front-Upper-Control-Arm-Bearing-E90-E92-E93-M3-E82.html
as 
M3SQRD said, that wishbone arm is a sealed bearing. You are welcome to replace with an OEM replacement if you are concern with its condition.
M3SQRD said, that wishbone arm is a sealed bearing. You are welcome to replace with an OEM replacement if you are concern with its condition.
M3SQRD wroteI understand now. Thank you for clarifying.It’s a sealed bearing like the one used by BW in the LCAB:
https://www.bimmerworld.com/BimmerWorld-Precision-Front-Upper-Control-Arm-Bearing-E90-E92-E93-M3-E82.html
