M3 Aftermarket Wheel Pic Thread

Just finished building these.

CCW Classics
18x9 et13
18x10 et10

Nice build! Could picture it with some side spoilers. What is the specific color you used for your wheels?

dimeo187 wrote

Just finished building these.

CCW Classics
18x9 et13
18x10 et10

Avant garde M359
19x9 +18 - 19x10 +25
Tires are:
245/35/19 - 265/35/19

M3E93 by Paulo Oliveira, on Flickr

IMG_20200819_132248_467 by Paulo Oliveira, on Flickr

IMG_20200901_184640_102 by Paulo Oliveira, on Flickr

BimmerWorld TA5R
(for my dedicated track wheel setup)

2008, EDC on factory springs.

Front:
18" x 10", et25mm
(no spacers)
275/35/18

Rear:
18" x 11", et44mm
(5mm spacers added to make them et39mm)
305/35/18

Davisca455 wrote

BimmerWorld TA5R
(for my dedicated track wheel setup)

2008, EDC on factory springs.

Front:
18" x 10", et25mm
(no spacers)
275/35/18

Rear:
18" x 11", et44mm
(5mm spacers added to make them et39mm)
305/35/18

Our friend and customer Ioannis’ Alpine White E90 M3 was the perfect platform upon which to showcase our new Sprint Line forged wheels. With a host of tasteful mods already applied, we were excited to have such a clean M3 to showcase these 19”s.

Polished lips owners, is there any ceramic coatings to slow down the oxidation on the aluminum polished lips?

I can't put it down, it's just unreal beauty!

Does anyone with aftermarket wheels have a set of M359's laying around that you'd want to sell?

Just get AGs (12mm rear spacers added):

Here are some pics of set ups I've ran on my car last year:

-Oem 19" ZCP wheels with Michelin ps4s 255 and 275 tires

-Arc-8 18x10 et 25 square (5mm spacer front, 12 rear) 275/35/18 Conti ECS tires

-SM-10 19x10 et25, 19x11 et44 (same spacers as above) 265/35/19 and 305/30/19 Nankang AR1. Front tires were too tall and rubbed liner at full lock

-TE37 SL 18x10 et 25 square (15mm front spacer 12mm rear) 275/35/18 Conti ECS


I have to run at least a 5mm spacer on the front to clear spring perches on kw clubsports. Despite the 5mm spacer the paint on the spring rubbed off so i threw on some spare 15mm spacers i had, I'll probably replace them with some 10mm spacers eventually.

so much WANT in this thread, feelin money burning in my pocket

geuine zcp wheels, 10" squared. eibach springs with rear spring perch removed

Car originally came with 19" OEM Competition Wheels:







Apex 19" EC-7RS Media photoshoot:





Apex 18" EC-7:







Current; 18" Desmond Regamaster EVO II:

ApexRaceParts wrote

Our friend and customer Ioannis’ Alpine White E90 M3 was the perfect platform upon which to showcase our new Sprint Line forged wheels. With a host of tasteful mods already applied, we were excited to have such a clean M3 to showcase these 19”s.

Looks great! What stud conversion length on this car?

BMWsE92 wrote

Looks great! What stud conversion length on this car?

I don't think we have that noted, unfortunately.

[header="18" EC-7RS"][/header]



Wheels:
Forged EC-7RS in Anthracite
Front & Rear: 18x10 ET25

Tires:
Maxxis RC-1
Front & Rear: 275/35-18

Additional Modifications:
bilstein b12 prokit suspension
vorshlag camber-caster plate
RD front sway bars

so this is it? only about six different wheel designs for the m3? that's sad I mean nobody seems to have an individual basis in them. We went with our stock wheels powdercoated black due to the ones we wanted were $7500 USD! crazy expensive.

Aust1nYellow wrote

so this is it? only about six different wheel designs for the m3? that's sad I mean nobody seems to have an individual basis in them. We went with our stock wheels powdercoated black due to the ones we wanted were $7500 USD! crazy expensive.

What’s sad? Five designs in this entire thread? I doubt it. There are other wheel manufacturers with similar designs AND completely different designs. However, if you haven’t realized this, you’re seeing similar wheel designs from different manufacturers because those are the most popular wheel styles. If you want something different then there are several forged wheel manufacturers that offer between 10-20, sometimes more, wheel designs but it’s not their fault that you think $7500 is “crazy expensive.” Actually, $7500 in reality is quite reasonable if it’s from a well-respected forged wheel manufacturer. Enjoy your non-f8x non-imaginative black powdercoated wheels. Also, is there a reason why you posted to a picture thread on e9x M3s on an e9x M3 forum?

Apex VS-5RS - Anthracite - 18x10 ET25 Sqaure, no spacers, -2.5 camber in front

mfection wrote

bbs rgr
19x9 et 20 front
19X10 et 25 rear
nitto invo 255/35 front and 275/35 rear

plenty of room in the rear, clears lock to lock in the front but only by a few mm from the inner wheel well.
good light weight wheel for looks and performance on the track

Beautiful Set-up! FYI to all: I'm going to be pulling my Custom-Finished BBS RG-Rs out of storage and listing for sale by the end of the month. It was a very aggressive setup for our E90 LCI 335d, but I'm pretty sure the specs are on-point for the M3 crowd...
Front: 19x8.5 ET32 BBS RG-R custom finished in Midnight Blue / Mag Blue
Rear: 19x10 ET25 BBS RG-R custom finished in Midnight Blue / Mag Blue
Custom Finished in Volk Racing Mag Blue as seen here (SORRY IT'S NOT AN M3!): NEW PICS ADDED: custom front bumper (molded CF lip & deleted reflectors), Post 999 [#3]

If you google "midnight blue BBS RG-R" they are just about the only ones around would love to see them wind up on an e90 M3. Would look amazing on White, gray, silver, black, etc.

FormerRotor wrote

Beautiful Set-up! FYI to all: I'm going to be pulling my Custom-Finished BBS RG-Rs out of storage and listing for sale by the end of the month. It was a very aggressive setup for our E90 LCI 335d, but I'm pretty sure the specs are on-point for the M3 crowd...
Front: 19x8.5 ET35 BBS RG-R custom finished in Midnight Blue / Mag Blue
Rear: 19x10 ET25 BBS RG-R custom finished in Midnight Blue / Mag Blue
Custom Finished in Volk Racing Mag Blue as seen here (SORRY IT'S NOT AN M3!): NEW PICS ADDED: custom front bumper (molded CF lip & deleted reflectors), Post 999 [#3]

If you google "midnight blue BBS RG-R" they are just about the only ones around would love to see them wind up on an e90 M3. Would look amazing on White, gray, silver, black, etc.

these look great on the 335d! the wheels are technically somewhat viable as M3 spec (E90/E92) but would need spacers to achieve the same fitment.

the fronts are less aggressive than stock non-ZCP 19s (220M), which are 19x8.5 ET29. it seems that on stock camber, an 18mm spacer is needed for those to be flush , so a 20mm would be needed for the same fitment on these (on stock camber/no plates). I think this amount of spacer would be concerning for some, but for reference, the M2 CSR runs 41mm spacers up front, albeit by design from the factory.

the rears are the same fitment as stock ZCP 19s (359M), which are also 19x10 ET25. these are pretty easy to fit as they're the same fitment - 10mm spacers to be flush with 265/35/19 tires, likely less spacer if you wanted to run 275/35/19. no spacers would be fine too on this fitment tbh.

just wanted to provide some input if you wanted to sell them as M3 fitment!

edit: nvm goddamn this guy posted this everywhere including bumping a thread from 2010 lmao