Still selling these frames and clips?
BIMMERPOST Classifieds
Shifter Boot Clips / Plastic Boot Frame (3D Printed)
For Sale
$1.00
Bayonne, New Jersey
Listed by
buglinjo
Trade History
⭐ Flawless (5/5 Successful)
Established
Safety Disclaimer: BIMMERPOST does not verify the authenticity of listings, buyers or sellers. You are dealing with third-party individuals. Always conduct due diligence, use secure payment methods that offer built-in buyer and seller protection, and protect yourself against fraud. Never use non-reversible payment methods (like direct bank wire or peer-to-peer cash apps) with strangers
Trader Profile
Loading...Recent Transactions
Loading history...
28KVIEWS
128REPLIES
20APPRECIATES
07-20-2026LAST POST
buglinjo wroteNICE!! Do you still have these? Will need either a frame+clip or just clips very soon when I do the F10 knob upgrade.I have designed improved clips for eBay shifter boot holder. It broke on me in a week after I had glued my new F10 shifter on. So I had 2 options, removing shifter boot from the plastic and buying a new one, or designing new clips which will hold up forever.
That eBay one has very fragile clips, so I replaced all of them with my design clip and voila... It snapped in the place like a champ. These clips are printed with PETG, so very flexible and won't break in high temps or even if you bend it 180 degrees.
I'm not trying to get rich from this. The price will be for all 4 $20 shipped.
UPDATE: Now selling full plastic frame with clips (detached, you'll have to glue them using flexible adhesive) for $50 shipped.
Here are some pics of my previous designs and the last one on the right is the latest design I used:
Latest design:
Here are some pics of the finished product:
I have used this glue, which worked perfectly:
hi I need a shifter frame and tabs can you please sell me a set
thanks
btw great work
erickmarciano@hotmail.com
erick
thanks
btw great work
erickmarciano@hotmail.com
erick
Are we still able to purchase just the clips?
Hi everyone,
Sorry that I have not responded for a while. I'm out of the market now as I sold my M3 and don't have enough time and energy to pack and ship the orders.
I've decided that it would be good for the community to make my 3D models open and free for everyone. I'll include the link below.
Donations would be appreciated though. Please feel free to comment and ask questions at the Printables website.
Link: https://www.printables.com/model/345239-bmw-e92-m3-manual-shifter-frame-and-clips
Thank you everyone again for the support. I love the community!
Sorry that I have not responded for a while. I'm out of the market now as I sold my M3 and don't have enough time and energy to pack and ship the orders.
I've decided that it would be good for the community to make my 3D models open and free for everyone. I'll include the link below.
Donations would be appreciated though. Please feel free to comment and ask questions at the Printables website.
Link: https://www.printables.com/model/345239-bmw-e92-m3-manual-shifter-frame-and-clips
Thank you everyone again for the support. I love the community!
That’s so cool of you
What material should we print in ?
Thanks
What material should we print in ?
Thanks
ertech wroteI'd suggest PETG or PC blend or better.That’s so cool of you
What material should we print in ?
Thanks
PLA is not recommended as it might melt on low temps.
Bringing the thread back from the dead! Is there anyone out there who I can pay to print one for me?!
Viper4 wroteStill need one? I'm making a few boots this summer so I'd be happy to once I get any kinks worked outBringing the thread back from the dead! Is there anyone out there who I can pay to print one for me?!
PSA
I had this printed from the STL file, and I'm not sure if its the file or the car, but it is quite different to both the stock frame and the hole it would need to clip in to. I have a RHD 2008 (pre-LCI) e92 M3, and there is no way this will fit. Could be a difference between LCI and pre-LCI, or RHD vs LHD, but I printed it twice on two different printers and both came out the same. Just a warning for those who come after me.
Not trying to take anything away from buglinjo, I'm sure these worked for some of you, but no bueno for mine.
I had this printed from the STL file, and I'm not sure if its the file or the car, but it is quite different to both the stock frame and the hole it would need to clip in to. I have a RHD 2008 (pre-LCI) e92 M3, and there is no way this will fit. Could be a difference between LCI and pre-LCI, or RHD vs LHD, but I printed it twice on two different printers and both came out the same. Just a warning for those who come after me.
Not trying to take anything away from buglinjo, I'm sure these worked for some of you, but no bueno for mine.
buglinjo wroteI have designed improved clips for eBay shifter boot holder. It broke on me in a week after I had glued my new F10 shifter on. So I had 2 options, removing shifter boot from the plastic and buying a new one, or designing new clips which will hold up forever.
That eBay one has very fragile clips, so I replaced all of them with my design clip and voila... It snapped in the place like a champ. These clips are printed with PETG, so very flexible and won't break in high temps or even if you bend it 180 degrees.
I'm out of the market and do not print any new frames or clips, but I decided to make the project open and free for everyone.
Here's the link: https://www.printables.com/model/345239-bmw-e92-m3-manual-shifter-frame-and-clips
Donations would be appreciated. Thank you everyone!
20086MTM3 wroteTo my (untrained) eye, it just looks to be a mirror image in right and left hand drive cars. Have you tried again inverting the model horizontally? If you're thinking of trying again and either don't want or know how to do that I'm more than happy to help.PSA
I had this printed from the STL file, and I'm not sure if its the file or the car, but it is quite different to both the stock frame and the hole it would need to clip in to. I have a RHD 2008 (pre-LCI) e92 M3, and there is no way this will fit. Could be a difference between LCI and pre-LCI, or RHD vs LHD, but I printed it twice on two different printers and both came out the same. Just a warning for those who come after me.
Not trying to take anything away from buglinjo, I'm sure these worked for some of you, but no bueno for mine.
Hello
Is anyone making this shift boot frame?
Is anyone making this shift boot frame?
buglinjo wroteHello i can’t PM yet but was curious if these clips work on the DCT ring? mine missing clips and was previously held in with tapePM me and I'll print for you.
EX0PIL0T wroteYes please! If the offer still stands and you want beer money! Sorry for my delay in seeing this.Still need one? I'm making a few boots this summer so I'd be happy to once I get any kinks worked out
Viper4 wroteNo worries. I should have some free time in the next week to invert the model and do some test printsYes please! If the offer still stands and you want beer money! Sorry for my delay in seeing this.
Do you happen to have the G20/G80 circular ring on the shift boot that attaches to the stock shift knob? Let me know I’m really in need of that. Thanks.
EX0PIL0T wroteThanks! I’m LHD U.S. spec. Hopefully less work for ya.No worries. I should have some free time in the next week to invert the model and do some test prints
Viper4 wroteAh so you just need one shipped? Send me a pm if thats all it is.Thanks! I’m LHD U.S. spec. Hopefully less work for ya.
PM’d.
